 |
|
 |
| |
|
|
| COLOUR TV DYNAMIC DEMONSTRATOR SPECIFICATION
|
Introduction: LAB Colour TV Dynamic Demonstrator is a comprehensive trainer. In this trainer all importance has been given to practical study of various parameters. All these circuits are mounted on a single PCB. Hence all wiring mistakes are totally eliminated. Therefore the performance of all trainer will be greatly enhanced. NOTE: However performance of our TV trainer may vary in operation compared to commercial TV Receivers. You must make your own arrangements for erecting antenna at your college. INSTRUCTION MANUAL: Our Manual is very descriptive giving details to conduct experiments, like trouble shooting, identifying faulty sections by introducing faults. | Housing: | It is housed is an elegant cabinet | | Dimension: | 139cms x 52cms x 48.5cms | | Weight: | (Approx.) 50 KGS | | Power: | 230VAC - Mains operated |
SPECIFICATION OF COLOUR TV RECEIVER | 1. | Receiving System : | CCIR B/G | | 2. | Colour Receiving System : | PAL & NTSC-PLAY BACK | | 3. | Receiving Channels: | VHF-Low : Ch 2-4
VHF-High : Ch 5-12
VHF : Ch 21-69
Tuner : Hyperband | | 4. | Picture Tube : | 36 cm, 90 degree Deflection | | 5. | Antenna Input Impedance : | 75 OHMS, Unbalanced | | 6. | Speaker : | 3" 5", 16 Ohms, 2 pcs | | 7. | Sound Output : | 30W PMPO | 8. | Audio/Video/Input/Output Terminals : | Audio input/output.
Level 500m Vrms
Impedance 30 KOhms
Video Input/Output level
1.0V p-p, 75 Ohms
Unbalanced (Composite Video Signal, Sync-negative) | | 9. | Power Requirement : | AC 220V, 50Hz (Regulation Range 160V to 270 AC) | | 10. | Power Consumption : | 80W (Max) | | 11. | Remote Control : | Volume, channel selection, MENU (Volume, Brightness, Contrast, Colour) | | 12. | Controls : | TV/AV
ASAM (Auto search, Auto Memory)
MENU (Brightness, Contrast, Colour)
VOLUME
PROGRAMME (Channel select) |
| DIMENSION : | 110 x 51 x 57 cms | | WEIGHT : | 50KGS |
(These specifications are subject to change without notice) SALIENT FEATURES: - Block diagram of T.V. is screen printed on the front panel in multi colour.
- Necessary Jacks to measure voltages and waveforms are provided on the surface of the PCB.
- 15 Faults can be simulated.
- No Desoldering/Soldering required to simulate defect
- Works as normal T.V. when the controls are normal.
- Picture Tube is fixed in the cabinet.
- Detailed circuit diagram given in the Instruction Manual which explains in details section wise/Alignment.
- Dust Cover is provided.
|
|
|
|
|
|
|
 |
|
 |
