Objectives of this experiment:
To construct OR, AND, NOR, NAND, NOT gates using diodes & transistors and resistors and verify the truth table of each gate. Low & high points are provided as inputs. LEDs are provided as outputs.

Built in regulated power supply: - 5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To verify demorgan's theorems by using combinational gates. You can verify the Boolean expressions. Switches are provided as Inputs. LEDs are provided as outputs.

Built in regulated power supply: +5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To construct half adder; half subtractor using AND and EXOR gates & verify the truth table & construct full subtractor, full adder and verify the truth table.

Built in regulated power supply: + 5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To construct R-S FLIP - FLOP using NAND gates & verify its truth table, and to verify Delay Flip Flop (D type) and T type Flip flops. Switches are provided for inputs and LEDs are provided to monitor output.

Built in power supply: + 5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To verify the truth table of JK Flip Flop & to construct shift register, asynchronous counter, ring counter, Johnson's counter.

Built in regulated power supply: + 5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To construct master slave JK FF using NAND gates and verify its truth table. Switches and LEDs are provided as inputs & outputs.

Built in regulated power supply: + 5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To convert Decimal to binary using diode matrix encoder LEDs are provided to monitor the binary outputs.

Built in regulated power supply: + 5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To construct decimal to binary encoder using 4 input NAND gates and verity the encoding. LED's are provided to monitor the outputs.

Built in regulated power supply: + 5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To study the operation of common anode & common cathode type displays. The BCD inputs given by logic-switches, which are decoded by the decoder IC and display will show the corresponding decimal equivalents.

Built in regulated power supply: +5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

Objectives of this experiment:
To construct excess 3 decimal converter and verify the outputs.

Built in regulated power supply: +5V/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms