This 4-1/2 Digits 20000 Counts True RMS Digital Multimeter is ideal for engineers, college use and professionals for whom accuracy in readings taken is a must. It has data hold facility, auto power off / Sleep Mode which turns the meter off when not in use.

It is 9V battery Operated and is used to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Frequency, and Capacitance, Diode testing and audible continuity testing facilities. It complies to the safety standards of IEC - 1010 - 1, CAT I 1000V, CAT II 600V and CAT III 300V.

It comes complete with rubber holster for protection against accidental drop of the instrument, testing leads, instruction manual and batteries. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges.

Interlabs 603 is a compact, rugged, battery operated, handheld 31/2 Digital Multimeter with large LCD display. They can be used for measuring DC voltage and current, AC voltage and current, resistance diode forward voltage, transistor hFE and open circuit testing with capacitance test facility etc.

It is designed for anti-interference and, thus is suitable for use in the field, car electric circuit repainnent, laboratory workshop and industrial maintenance.

This 4-4/5 Digits Digital Multimeter with 50000 Counts LCD Display is ideal for professionals for whom there is no compromise to accuracy. This is a complete Digital Multimeter with facility of analytical analysis via the RS-232 PC interface facility with which all the data can be down loaded to the PC for analysis.

It is 9V battery operated and is used to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Suseptance, Capacitance, Frequency, Pulse width, Duty Cycle and temperature. It also has the facility of zener diode and audible continuity testing. This is a CE approved product.

It comes complete with rubber holster for protection against accidental drop of the instrument, testing leads, instruction manual, RS-232 Interface cable, software and battery.

This is a compact, rugged, battery operated, hand held, 3-1/2 Digital Multimeter with Large LCD Display.

This can be used to measure DC Voltage and Current, AC Voltage and Current, resistance, Diode Forward Voltage, Transistor hFE and open circuit testing etc.

It is designed for anti - interference and thus is suitable for use in the field, car electric circuit repairment, laboratory workshop and industrial maintenance etc.

This instrument is intend for use in installation of over voltage category II according to IEC664, For measuring circuits not exceeding 600V AC/DC, 10A

A most complete and most accurate Hand Held Test Tool. It has a 3.3/4 Digits Large Liquid Crystal Display which makes the measurements very simple to read even from a distance.

It has CE mark approval and is designed to meet EN61010-1 standards. It has the facility for logic testing, diode testing, transistor testing and audible continuity testing. It has Peak Hold Facility.

It has overload protections. It is used to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Frequency and Capacitance.

It comes complete with Carrying Case, Testing Leads and instruction Manual.

A auto Ranging Digital Multimeter. It is very handy and is highly accurate.

It has 3-3/4 Digits Liquid Crystal Display with 3999 Counts and has 42 segments high speed Analog Bar graph.

It has Maximum & Minimum Recording and Relative measurement facilities.

It complies to the safety standards of 600V Cat II IEC 1010. It has Auto Power Off facility for saving the life of battery when not in use.

It is used to measure AC Current, DC Current, AC Voltage, DC Voltage, Resistance and Frequency up to 40 MHz. It has the facility for Diode testing and audible continuity testing.

This is a 3-3/4 Digits 3999 Counts Autoranging Digital Multimeter that is a must for all technicians and students of pursuing technical qualification. It has large contrast backlit LCD Display and is the most compact and complete multimeter.

It has the facility to measure AC Voltage, DC Voltage, AC Current, DC Current, Resistance, Capacitance, Frequency, Duty Cycle, Temperature in both Degree Centigrade and Fahrenheit scales. It has Diode Testing and audible continuity testing facility. It also has Auto Power Off and relative functions.

It comes complete with rubber holster for protection against accidental drop, testing leads, K type temperature sensor, instruction manual, testing leads and battery.

This Hand Held Non Contact type Tachometer has 5 Digits LCD Display. It is used to measure RPM of equipment that is hard to reach. It is Battery operated. It is used to measure in the range of 5 to 99,999 rpm complete in a box with all standard accessories.

It comes complete with reflecting tape and instruction manual.

This is a Digital Hand Held Contact type Tachometer and has Micro Computer LSI Chip.

Having 5 Digit LCD Display , battery operated Range : 5 to 19,999 rpm , 0.05 to 1999.9 m/min , 0.2 to 6560 ft / min. Accuracy of 0.05% with Carrying Case with all accessories in a box with memory call button.

It comes complete with instruction manual and various tachometer attachments.

This is a digital contact cum Non Contact combined, Hand Held Tachometer.

It has 3 - ? Digit LCD Display. Having measuring range of 5 to 99,999 rpm having 5 Digit to read the resolution in RPM. Accuracy 0.05%.

It comes complete with Carrying Case, Reflecting tape, instruction manual with all standard accessories.