This is a 10MHz Single Channel Single Trace Oscilloscope. It is a kind of portable instrument. The bandwidth of Y axis is DC ~ 10 MHz and the deflection factor is 10mV ~ 10V / Div. It can be used up to 100V / Div supplying with the 10:1 probe.
It has wide measurement range, high sensitivity, trigger lock etc. It is very easy and simple to handle. It is of small size, light weight and high duty ratio and is proper to use in colleges and for engineer and technicians.
In case if required then service manual can also be provided. Test and Calibration Certificate Traceable to National or International Standard can also be made available at extra charges.
This is a 20 MHz Dual Trace Dual Channel Oscilloscope that is ideal for, professionals as well as students undergoing technical studies. It is a rugged, light weight instrument that features a bright, sharply defined trace on a 80 by 100 mm cathode ray tube.
The low noise vertical system supplies calibrated deflection factors from 5mV to 5V per division at full bandwidth. Stable triggering is achieved over the full bandwidth of the vertical system. The flexibility and high sensitivity of the trigger system provides a range of conveniences such as automatic mode, normal trigger mode, independent selection of TV field triggering and single sweep triggering.
The internal trigger signal is ac coupled. An external triggering signal or an external Z -axis modulation signal can be applied via a front panel or rear panel connector and the source selector switch. The horizontal system provides calibration sweep speeds from 0.2s to 0.1 Micro S per division. For greater measurement accuracy a x5 magnifier circuit extends the maximum sweep speed to 20 ns per division. The instrument is supplied with operator's manual, two signal probes and a power cord.
This is a 30MHz Dual Trace Dual Channel Oscilloscope that is ideal for professionals as well as students undergoing technical studies. It is rugged, lightweight instrument that features a bright, sharply defined trace on a 80mm by 100mm cathode ray tube. It is best used for colleges, laboratories and for R & D sections.
The low noise vertical system supplies calibrated deflection factors from 5mV to 10V per division at full bandwidth. Stable triggering is achieved over the full bandwidth of the vertical system. The flexibility and high sensitivity of the trigger system provides a range of conveniences such as automatic mode, normal trigger mode, independent selection of TV field triggering and single sweep triggering.
This is a 60MHz Dual Trace Dual Channel Oscilloscope that is ideal for professionals as well as students undergoing technical studies. It is rugged, lightweight instrument that features a bright, sharply defined trace on a 80mm by 100mm cathode ray tube. It is best used for colleges, laboratories and for R & D sections.
This is a 100MHz Dual Trace Dual Channel Oscilloscope that is ideal for professionals as well as students undergoing technical studies. It is rugged, lightweight instrument that features a bright, sharply defined trace on a 80mm by 100mm cathode ray tube. It is best used for colleges, laboratories and for R & D sections.
The low noise vertical system supplies calibrated deflection factors from 2mV to 5V per division at full bandwidth. Stable triggering is achieved over the full bandwidth of the vertical system. The flexibility and high sensitivity of the trigger system provides a range of conveniences such as automatic mode, normal trigger mode, independent selection of TV field triggering and single sweep triggering.
The internal trigger signal is ac coupled. An external triggering signal or an external Z -axis modulation signal can be applied via a front panel or rear panel connector and the source selector switch. The horizontal system provides calibration sweep speeds from 0.2s to 10 Micro S per division. For greater measurement accuracy a x5 magnifier circuit extends the maximum sweep speed to 20 ns per division. The instrument is supplied with operator's manual, two signal probes and a power cord.
