PC based EPROM programmer is intended to p program 2716, 2732, 2764, 27128, 27256, and 27512 including CMOS versions. The programming voltages (VPP) can be set to 12.5V, 21V, or 25V by software selection. It is possible to program 1, 2 or 4 EPROM's at a time. This add-on card occupies one slot on the motherboard of the computer.

Features:

• Runs under MS/PC - DOS 3.0 and above.
  
• Load disk object file in buffer.
  
• Display, modify, checksum or print buffer.
  
• Blank check.
  
• Reading buffer address 0000.
  
• Verify with buffer address 0000.
  
• Copy from buffer address 0000.
  
• Read (A) in buffer any address.
  
• Verify (A) with buffer any address.
  
• Copy (A) from buffer any address.
  
• Copy (B) blank checks and copy.
  
• Verify (B) verify & display error.
  
• In addition to the above, it supports conversion of Intel Hex format to object files.

NOTE: Your IBM Computer or Compatible system must have, at least one vacant ISA slot on the motherboard, to enable the ADD-ON card to be inserted.