 |
|
 |
| |
|
|
| PC BASED OSCILLOSCOPE
(IBL-2100) |
| SYSTEM REQUIREMENTS | WINDOWS 95 / 98 | PC Connection:
| Parallel | Power:
| DC ± 8V (+ :0.8 Am / -; 0.2 AM) | Channel:
| 2 channel | Impedance:
| 1MW 25 pF | Coupling:
| AC / DC / GND | Bandwidth:
| DC ~ 30 MhZ - 3dB | Resolution:
| 8 bit | Voltage Range:
| 50 mV ~ 5V, 1, 2, 5, 7 step | Display:
| 8 x 10 div 9DSO) | Accuracy:
| ± 3% (Gain), ± 0.01 % (Time) | | Time base range: | 5ns ~ 320s | Input range:
| ± 50V | Max. input:
| ± 100 V DC Continuous ± 250 V (DC + AC) Transient | X - Y:
| ± 3% | Auto setup:
| DC ~ 30 MHz, Frequency counter | Sample clock rate:
| 1 Hz ~ 100 MHz | Trigger type:
| ± slope | TV - V / H, TRIG:
| Yes | Trigger source:
| CH1, CH2, EXT | Trigger type:
| Analog | Mag (time):
| OK | | Offset Range: | ± 4 div | Data Acquisition:
| 32 byte / CH | Max Sampling rate:
| 100 MPS / CH, Dual 100 MPS | Auto calibration:
| OK | Trace Display:
| Point / Line | Grid on / off:
| Grid on / off | Vertical mode:
| CH1, CH2, Dual, ADD | Horizontal mode:
| AUTO, NORM, SINGLE | | Single: | DC ~ 30MHz |
SPECTRUM ANALYZER | Channel: | 2 channel | | Methode: | Fast fourier transform | | Spectral Range: | 0Hz ~ 50MHz | | Cursor: | Frequency | | Pass / fall test": | Yes | | Instrument function: | DSO, S/A | | Data Point: | 32K per channel |
GENERAL | Include with Unit | DSO, Power Supply, Software, Cable, Manual, FFT | Optional | Probe (2EA), TV-V/H, TRIG |
|
|
|
|
|
|
|
 |
|
 |
