D.c. - D.c. Converter Exporters, Voltage Multipliers (doubler, Using Zener Diode & Emitter- Follower Pass Transistor Manufacturers, Variable Voltage, Half-wave, 0-12v Dc Power Supply Kit India, Tripler & Quadrupler) Manufacturers, Current Limiting Ic-regulator Exporters, Shunt Type Dc Voltage Regulator, Variable Voltage Ic-regulator, Tripler & Quadrupler) India, Variable Transistorized Regulated Power Supply with Short-circuit Protection, Variable Voltage, Using Zener Diode & Emitter- Follower Pass Transistor India, D.c.-a.c. Inverter Manufacturers, Laboratory Equipments India

Objectives of this experiment:
1. To determine the characteristics of HALF-WAVE RECTIFIER.
2. To determine the characteristics of FULL-WAVE RECTIFIER.
3. To determine the characteristics of a BRIDGE RECTIFIER.
4. To investigate how the size of the filter capacitor affects the ripple amplitude and the output voltage.
5. To demonstrate the operation of a full-wave voltage doubler. An unregulated power supply consists of a rectifier and a filter. This is used in applications where the DC voltage is not critical, in respect of regulation and ripple contents, like radio receivers, audio amplifiers, etc.

Built in power supply: (15-0-15)VAC/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

STABILIZED POWER SUPPLY, USING ZENER DIODE & EMITTER- FOLLOWER PASS TRANSISTOR

Objectives of this experiment:-
1. To investigate the operation of a zener diode, as a shunt regulator. This is useful in low-current applications.
2. To demonstrate the operation of an emitter-follower regulator, In conjunction with zener diode. This type is useful in fixed voltage and higher current applications.

Built in power supply: (0-12) VAC/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

SERIES TYPE DC VOLTAGE REGULATOR

Objectives of this experiment:
To verify that this regulator maintains constant output voltage despite variations in input load.

Built in power supply: (0- 18) VAC/1A
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

SHUNT TYPE DC VOLTAGE REGULATOR

Objectives of this experiment:
1. To demonstrate the operation of shunt type DC voltage regulation.
2. To study how the zener diode (which acts as bias reference for the regulator) regulates the output.
3. To demonstrate that in spite of load variation (provided) the voltage remains constant.

Built in power supply: (15-0-15) VAC/1 A
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

VARIABLE VOLTAGE IC-REGULATOR

Objectives of this experiment:
1. To demonstrate the operation of an adjustable voltage regulator, using LM 317 IC.
2. To demonstrate how ripple can be reduced considerably.

Built in regulated power supply: +15V/150mA.
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

VARIABLE TRANSISTORIZED REGULATED POWER SUPPLY WITH SHORT-CIRCUIT PROTECTION

Objectives of this experiment:
Study the % of regulation. The output voltage varies from 4V-12V

% Regulation = No load - Full load / No load x 100

Built in power supply: (0 - 18) VAC/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

VARIABLE VOLTAGE, CURRENT LIMITING IC-REGULATOR

Objectives of this experiment:
To construct variable voltage regulator under different load with current limiting. i) To check the output current. ii) Load regulation. iii) Input regulation.

Built in power supply: (0-40) V
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

SWITCH-MODE POWER SUPPLY (SMPS)

1. To construct & demonstrate a switch mode power supply and verify step-up; step down; inverse mode.
2. To determine load regulation.
3. To observe the waveform and frequency of switching circuit.

Built in regulated power supply: +(1.2V to 12V) DC/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge

IC REGULATED POWER SUPPLIES (POSITIVE & NEGATIVE VOLTAGE TYPES)

Objectives of this experiment:
1. To investigate the operation and characteristics of the fixed positive and negative voltage regulator, using IC-regulator.
2. In these experiments, you will use modern voltage regulators. You will be surprised to find little or no ripple present on the output; which is a real advantage of voltage regulators. They can compensate for poorly filtered power supplies.

Built in power supply: (15-0-15) VAC/300mA
Input Supply: 230 VAC/50Hz mains operated.
Dimension: 27cms x 17cms x 10cms.
Weight: 500gms

See Enlarge