| |
Click to Enlarge
|
COMMUNICATION SYSTEM TRAINER
Salient Features - Can learn and experiment about variety of communication mediums ( AM,FM,FO,Wired ) & methods (Modulation / Demodulation– Analog/Digital )
- Covers Analog communication , Digital communication , Fiber optics characteristics as well as communication , Wired communication through various modular experiment panels.
| TECHNICAL SPECIFICATIONS OF MASTER UNIT | | CommunicationMedium | FM (Wireless) | AM (Wireless) | Fiber Optics | Transmitter
a) Carrier
b) I/P Ampl. I/P Freq.
c) Power O/P | Factory Tuned to 98 MHz with built in FM(VCO) | 500KHz to 1.5MHz | TTL BW - 50KHz Analog BW – Audio | | 0-5 Vpp (digital) Audio range. | 0-5 Vpp (digital) Carrier modulated i/p(audio range) | 0-5 Vpp (digital) Modulated i/p (audio) | 100mW | | Receiver | External 5 BS5 for antenna connection, 2nd IF i/p, 2nd IF o/p , speaker & Audio amplifier, AM/FM Select switch, L/S impedance 8 ohm / 0.5 W | Detector (tr=8uS ) Separate BS5 socket for Digital ,AC coupled & TTL ops. | | Controls (Man) | Settable 88 MHz to 108 MHz | Gain control Settable from 0 to 4.5V | Transmitter bias Control. | | Antenna / Transmission | Telescopic antenna | 1m plastic fiber cable, CRT-1.492, NA-0.5,l–660nm, step index, terminated with SMA connector. |
See Enlarge
|
|
|
|
Click to Enlarge
|
ELECTRICAL AND ELECTRONIC SYSTEM TRAINER
Salient Features - Aesthetically designed injection moulded electronic desk (Master unit) carrying useful experiment resources Variable Power supplies /Status / Pulsar / Function Generator , DPMs etc.
- Connection through Sturdy 4mm Banana Sockets & Patch Cords.
- Replaceable experiment panel placed at the centre of master unit is secured in an ABS molded plastic sturdy enclosure, and has colorful screw less overlay showing circuit & its connection tag numbers for easy connectivity.
- Set of Users Guide provided with each Unit.
- More than 31 Experiment panels offered to cover the Magnetism, AC-DC circuit, Digital gate, Op-Amps, Component , Power Semiconductor devices, Network.
See Enlarge
|
|
|
|
Click to Enlarge
|
ANALOG - DIGITAL TRAINER
Specifications
- Aesthetically designed injection moulded electronic desk / Master unit carrying useful experiment resources like variable.
- Power supplies / Status Switches / Indicator probe / Pulsar / Function Generator DPMs etc.
- Connection through study 4mm Banana Sockets & patch cords.
- Built in bread board panel with 1280 tie points and 400 distribution points totalling to
1680 points along with 4mm banana sockets for tapping from the trainer +5V, +/-12V/ GND for the circuits to be assembled on bread board using single stand (#22/24) wire.
See Enlarge
|
|
|
|
Click to Enlarge
|
XPO SERIES OF MICROPROCESSOR TRAINER
Specifications - Separate Student Workbook, Instructor Guide and technical Reference
- Hardware programming & Software programming.
- 7 Segment / 16X2 / 16X 4 / in Display options.
- Injection moulded Plastic enclosure.
- Use of standard PC 101 Key Keyboard for programming.
- Emphasis on Hardware troubleshooting through on board short links.
- Exhaustic Didactic Courseware.
- Use of standard PC SMPS recommended for Overseas Markets
MODEL | XPO-85/Z80 | XPO-88/86 | XPO-51/31 | XPO-97/196 | XPO 68K | XPO 11 | CPU | 8085/Z80 | 8088/86 | 8051/31 | 8096/196 | 68000 | 68HC11 | | MEMORY CAPA. Monitor EPROM Battery Back Up Scratch Pad (Expandability) | 36KB(64 KB) 16KB(64 KB) 4KB( 8 KB) | 128 KB 64 KB (128 KB) 64 KB ( 64 KB) | 36 KB 16 KB (64KB) 2 KB ( 8KB ) | 24KB 16KB 8KB | 128KB 64KB (128 KB) 64KB | 24KB 20KB 8KB | ADVANCED S/W
Assembler Disassembler (Optional) | 1 Pass line assembler 2 pass Assembler 2 pass Disassembler Basic Interpreter Hex Dump | Line assembler Disassembler, Hex Dump. | 1 Pass line assembler Disassembler | Disassembler and assembler facility with S/W on floppy. | 1 Pass line assembler Disassembler | 1 Pass line assembler Disassembler | | ADDITIONAL SERIAL I/O | SID/SOD Based (8085) NA (Z80) | NA | Using built-in TxD/RxD | Using built-in TxD/RxD | Using built-in TxD/RxD (6850) | Using built-in TxD/RxD | | INTERRUPTS | 8 Nos.Using 8259(8085) 4 Nos. Using CTC(Z80) | 8 Nos. Using 8259A | Built in CPU 2no. of ints. | Built in CPU 8 no. of Ints. | Built in CPU 7 no. of Ints. | Built in CPU 7 no. of Ints. |
See Enlarge
|
|
|
|
Click to Enlarge
|
CRO TRAINER
Salient Features - Coloured sliding panels with 4mm sockets for test points and panel 'OK' LED indicator.
- Operational Block diagram is spread over colourful informatic functional units called as panels.
- Front end connection through patch cords and standardised D connector cable.
- Light weight but sturdy Powder coated floor standing aluminum frame to hold various panels & CRO.
- Rack Dimensions : 105cm(W)X152cm(H)X30cm(D) approximately.
- Facilitates study of principles of operation & troubleshooting skills.
- Operating on 220V/240V, 50Hz, single phase AC supply.
- Can be used as a regular lab CRO, when not in use as a Trainer.
See Enlarge
|
|
|
|
Click to Enlarge
|
PLC TECHNOLOGY TRAINER
Salient Features
- Aesthetically designed injection moulded electronic desk (master unit) carrying useful
- PLC resources like opto-isolated outputs (Relays & solid state) as well as inputs with
- LED indications for output simulations or switches for input simulation.
- Built in Analog I/O channels with potentiometer for AI simulation.
- Connection through sturdy 4mm Banana sockets & Patch cords
- Useful to demonstrate and understand working principles behind PLC technology.
- Student’s workbook & Instructor’s Guide provided with each unit.
See Enlarge
|
|
|
|
Click to Enlarge
|
COLOUR TV TRAINER
Salient Features - Colour TV kit provided with the trainer is the latest one which based on modern Technologies and not on any outdated ICs.
- Main Colour TV kit Mounted in regular moulded TV enclosure to give real life look with picture tube (20"). For easy viewing a transparent acrylic lid with brightly illuminating tube light is provided.
- The complete trainer mounted on a powder coated sturdy lightweight Aluminum Flat Panel floor standing stand.
- Trainer consists of 9 experiment panels giving a good idea about different important section of TV receiver and a fault panel having 14 non-destructive faults.
- Experiment panels provide 30 direct accessible test points to observe different audio, video signals and output of different sections in non-destructive manner.
- Faults have been implemented through contacts of miniature relays(14 nos.) mounted inside the TV cabinet to prevent corruption of picture quality.
See Enlarge
|
|
|
|
Click to Enlarge
|
SENSOR TRAINER
Salient Features
- Aesthetically designed injection moulded electronic desk. Master unit carrying useful experiment resources like Power supplies, DPMs, Computer Interface, Bar graph LED indicator Function Generator.
- Connection through sturdy 4mm Banana Sockets & Patch cords.
- Each experiment panel is secured in an ABS molded plastic sturdy enclosure, and has colorful screw less overlay showing circuit & its connection tag numbers for easy connectivity.
- Set of Users Guide provided with each unit.
- Computer Interface facility.
- 5 Types of Displacement Sensor - LVDT, Capacitive & Resistive etc.
- 6 Types of Speed Sensor - Magnetic pickup, Photo reflective etc.
- 4 Types of Temp. Sensor - Thermocouples, IC Sensor (AD 590)
- 4 Types of Light Sensor - Photo Resistor , LDR, Photovoltaic cell/ Solar cell & Photodiode
- Piezo Resistive Sensor based panel
See Enlarge
|
|
|
|
Click to Enlarge
|
POWER ELECTRONICS TRAINER XPO - PE
Salient Features
- Power Semiconductor Application Experiment panel
- SCR Converters
- Advanced firing Schemes
- SCR forced Commutation Techniques
- SCR based Inverters
- Cycloconverter
- SCR based Chopper
- SCR Triggering Schemes
- dv/dt behaviour of SCR
See Enlarge
|
|
|
|
Click to Enlarge
|
DECADE BOXES
Salient Features - Aesthetically designed injection moulded enclosure
- Compact, light weight, with colourful facia.
- Connection through 4mm screwable banana sockets.
- Use of Non polar capacitors.
| TECHNICAL SPECIFICATION | RESISTANCE | INDUCTANCE | CAPACITANCE | | No. of Decades | 6 No. rotary switches of 10 step each | 6 No. rotary switches of 10 step each | 6 No. rotary switches of 10 step each | | Range | 0 - 999.999KW 6 decades of 1W , 10W , 100W , 1K,10K,100K | 0 - 999.999mH 6 decades of 1m H,10m H, 100m H, 1mH,10mH, 100mH | 0 - 9.99999m F 6 decades of 10pF, 100pF, 1KpF, 10KpF, 100KpF,1m F | | Wattage/Voltage | 2W | 1/2W | 50V | | Mechanical Dimension | 215mm(L)X165mm(W)X40mm(H) Net weight : 700gm approx. |
See Enlarge
|
|
|
|
|
