Products by Category

Analytical and Scientific Instruments
Animal Cage
Astronomy
Audio visual item
Biology
Blood Bank Instruments
Centrifuge Wares
Chemical Electrical Heating Appliances
Chemistry
Civil Engineering Instruments
Compressor & Vaccum Pumps
Consumables
Cryo Labware
Desiccators
Diagnostic products
Digital Controllers
Digital instruments
Digital Meter & Testers
Digital Scales
Disposable Medical Surgical Products
Educational Aids
Educational Charts
Educational Materials
Electric Actuators
Electrical engineering laboratory
Electronic Educational Equipments
Engineering Equipments
Engineering, Polytechnic and Vocational Training Equipment
Environmental
Equipments For Fluid Mechanics Laboratary
Experimental Training Equipments
Fibre Glass Models
Flats & Wedges
Force & Motion
Geared Servo Motors
Hand Tools
Hospital Furniture
Hospital Instruments
Hydraulics
Image Analysis Softwares
Jacketed Reactor
Lab & General Equipment
Laboratory equipment
Laboratory Glassware
Laboratory Glassware
Laboratory Plasticware
Laboratory Supplies
Laboratory Testing Instruments
Laser Trainers
Liquid Handling System
Medical Batteries
Medical consumables
Medical Equipments
Microscopes
Microscopes and Accessories
Microtomes
Motorized Potentiometer
Nautical Instruments
New Products
Oil & Petroleum Testing
Ophthalmic Equipments
Opthalmic & Ent Equipments
Optical Components
Optical Products
Other Products
Paraffin wax dispenser
Passive Night Vision Devices
Pharma Machinery
Physics
Pipettes
Plastic Labware
Prepared Slides
Process Control Instruments
psychology lab equipments
Quality Control Laboratory Equipments
Safety Products
Scientific Lab. Equipments
Silicaware Quartzware
Solar Products
Solenoids
Spatulas
Stepper Motors
Suction Appratus & Unit
Sugar Factory Instrument
Surgical Instruments
Surgical Rubber Products
Test & Measuring Instruments
Water Stills(Glass & Quartz)
Water Treatment Plants
Waveguides
Wooden Lab. Products
 
Water Stills(Glass & Quartz)
[1] 2 3 [ Next»]
 
Borosilicate Glass Stills (EasyStill Mark 4 XL)
Click to Enlarge
Borosilicate Glass Stills (EasyStill Mark 4 XL)

The New "Interlabs Easystill ES-Mark 4 XL" provides high quality distilled water and incorporates several new & advanced safety features with additional wall mounting brackets.

  • Gate valve to prevent water wastage
  • Flow switch for boiler safety
  • Thermostat for overheat protection
  • Fuse for safety

Features:

  • Built-in Safety controls
  • Abundant Output
  • Efficient Condenser
  • High quality distillate
  • Powder coated stand

Features :

  • Built-in Safety Controls: The unit has built-in safety incorporating the latest features, such as,
    oGate Valve, which shuts off incase of power supply failure, thus preventing water wastage
    oFlow switch, which is provided for boiler safety. It shuts off power supply to the heater, in case of water supply failure.
    oThermostat: The heater is provided with thermostat for overheat protection.
    oFuse is provided for safety in case of voltage fluctuations and short circuit.
    oAdditional On/Off switch with Water failure indicator lamp.
  • Abundant output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium-plated heater, housed in a horizontal Glass boiler.
  • Efficient Condenser: The distilled output is cool ensured by a high efficiency coiled condenser. Temp. of distillate is 25-400C tested at ambient room temperature of 300C
  • High quality distillate: The distillate obtained is of high quality with low conductivity and is pyrogen free.
  • Screw thread connectors: are provided for easy plumbing and installation and to avoid the danger of glassware breakage during assembly
  • Powder coated stand: For long, rust free operation.
  • Teflon drain cock: For easy cleaning of the boiler.

Specifications :

Parameters Values
Output 4 lit/hr
Distilled water Quality Reagent Grade III
Conductivity(using raw water) 3.0-4.0 x 10-6S/cm
Conductivity(using treated water) 1.5-2.0 x 10-6S/cm
PH 5.5 - 6.0
Distillate Quality Pyrogen free
Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase,3 KW heater
Cooling water reqd 1-2 lit/min
Min. Pr.3 p.s.i
Dimensions (w x d x l)500 x 200 x 600 (mm)
Nett. Weight 6 kgs (app.)

See Enlarge



Borosilicate Glass Stills (PURE-HIT Q STILL  )
Click to Enlarge
Borosilicate Glass Stills (PURE-HIT Q STILL )

The new improved Interlabs Pure Hit Q Stills are made from Borosilicate glass (Pyrex glass) manufactured with a host of advanced safety features for Laboratory use.

Features :

  • Abundant Output: The still provides 4 lit/hr of high quality distillate by a 3KW Silica heater housed in a horizontal borosilicate glass boiler.
  • Distillate output is cool ensured by a high efficiency condenser.
  • Dual overheat protection and safety with Pressure Temperature Switch (PTS) for Boiler and condenser.
  • Level Sensor: For Automatic Operation and Reservoir level control.
  • Additional provision for wall mounting.
  • Silica sheathed heating element.

Specifications :

Parameters Values
Output 4 lit/hr
Distilled water Quality-
Conductivity 1.0 - 2.0 X 10-6S/cm
Resistivity 0.5 - 1.0 Megohm-cm
PH Not specified for high purity water
Distillate Quality Pyrogen free**
Temperature 25 - 35oC
Electrical Power 220/240 Volts, 50 - 60 Hz, 3 KW Single Phase
Cooling water reqd (min.) 1 lit/min
Min. Pr. 3 p.s.i
Dimensions (w x d x l) 56 x 16 x 43 (cm)
Weight7.5 kgs (app)

See Enlarge



Borosilicate Glass Stills (PURE-HIT STILL)
Click to Enlarge
Borosilicate Glass Stills (PURE-HIT STILL)

Interlabs Pure Hit Stills are designed for reliable continuous operation incorporating a host of features unmatched by comparable stills.

It is easy to use, safe to clean, thoroughly reliable and above all low cost.
CE Approval

Features :

  • Abundant Output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium plated heater housed in a horizontal borosilicate glass boiler.
  • Efficient Boiler & Condenser:The Boiler and Condenser are designed for high efficiency and provided with threading for easy plumbing of condenser. The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. Temperature of distillate 25-40 deg C.
  • Heater Thermostatically Protected: Heater is a 3 KW Chromium plated heater fitted with a thermostat whcih shuts off automatically in case of water supply failure.
  • Powder coated stand :The stand is zinc plated & powder coated for long rust free operation.
  • Easy and safe to use:Boiler is provided with teflon screw cork for insitu cleaning of the boiler.

Specifications :

Parameters Values
Output 4 lit/hr
Distilled water Quality -
Conductivity(using raw water) 3.0 - 4.0 X 10-6S/cm
Conductivity(using treated water) 1.5 - 2.0 X 10-6S/cm
PH 5.5 - 6.0
Distillate Quality Pyrogen free
Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW Heater
Cooling water reqd (min.) 1 lit/min
Min. Pr. 3 p.s.i
Dimensions (w x d x l) 50 x 15 x 45 (cm)
Weight 6 kgs (app)

See Enlarge



Borosilicate Glass Stills (EASY-STILL MARK-4  )
Click to Enlarge
Borosilicate Glass Stills (EASY-STILL MARK-4 )

The Easy-Still Mark-4 has an elegant design, is economical and efficient. It is available in attractive colours.

The yield is 4 lit/hr with a power input of 3 KW by a chromium plated heater which is thermostatically protected against overheat.

Features :

  • Abundant Output
  • Efficient Boiler & Condenser
  • Heater Thermostatically Protected
  • Easy and safe to use

  • Abundant Output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium plated heater housed in a horizontal borosilicate glass boiler.
  • Efficient Boiler & Condenser:The Boiler and Condenser are designed for high efficiency and and provided with threading for easy plumbing of condenser. The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. Temperature of distillate 25oC-40oC.
  • Heater Thermostatically Protected: Heater is a 3 KW Chromium plated heater fitted with a thermostat for overheat protection.
  • Powder coated stand :The stand powder coated for long rust free operation.
  • Easy and safe to use:Boiler is provided with teflon screw cork for in-situ cleaning of the boiler.

Specifications :

Parameters Values
Output 4 lit/hr
Distilled water Quality-
Conductivity(using Raw Water) 3.0 - 4.0 X 10-6S/cm
Conductivity(using treated water) 1.5 - 2.0 X 10-6S/cm
PH 5.5 - 6.0
Distillate QualityPyrogen free
Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW Heater
Cooling water reqd (min.) 1 lit/min
Min. Pr. 3 p.s.i
Dimensions (w x d x l) 48cm x 17.5cm x 61cm (app.)
Weight 4.85 kgs (app.)

See Enlarge



Borosilicate Glass Stills (EasyStill 1500 SDQ Single Distillation silica heater  )
Click to Enlarge
Borosilicate Glass Stills (EasyStill 1500 SDQ Single Distillation silica heater )

Easystill Mark 1500 SDQ/DDQ, single and double distillation unit gives high quality distilled water with an output of 1.5 lit/hr, having a power input of 1250 Watts(for SDQ) and 2x1250 Watts(for DDQ) respectively.

Easystill's unique features are a well designed boiler fitted with silica heater, Efficient condenser and screw thread connectors makes it an ideal, efficient and economic equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses.

Features :

  • Silica Heater: The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be rinsed and no damage is caused to the heating element.
  • Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser.
  • Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'o' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly.
  • Powder coated stand
  • Easy and safe to use


Specifications:

Parameters Values for SDQ Values for DDQ
Output 1.5 lit/hr 1.5 lit/hr
Distilled water Quality - -
Conductivity (using raw water) 3.0 - 4.0 X 10-6S/cm 0.8 X 10-6S/cm
Conductivity (using treated water) 1.5 - 2.0 X 10-6S/cm 0.7 X 10-6S/cm
PH 5.5 - 6.0 6.0 - 7.0
Distillate Quality Pyrogen freePyrogen free
Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 1250 W Silica heater 220/240 Volts, 50 - 60 Hz, Single Phase, 2X1250 W Silica heater
Cooling water reqd 1-3 lit/min 2-4 lit/min
Min. Pr. 3 p.s.i 3 p.s.i
Dimensions (w x d x l) 250 x 180 x 450 (mm) 2(250 x 180 x 450) mm

See Enlarge






Laboratory Distillation equipment may be used for various purposes namely, to distill - Water, Acids & Solvents. Interlabs has a range of distillation equipment designed for use in every application down to the general laboratory use.

Interlabs distillers are made :

  • From Quartz glass for very high purity water,
  • From Borosilicate glass for general applications &
  • From Metal for General & Industrial applications.

See Enlarge



Borosilicate Glass Stills
Click to Enlarge
Borosilicate Glass Stills

Interlabs WSQ - 4, water distillation unit gives high quality distilled water having an output of 4 lit/hr with a power input of 3 KW. Interlab's unique features along with the safety provisions makes it an ideal equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses.

Advantages :

  • Silica Heater
  • Gate valve to prevent water wastage
  • Flow switch for boiler safety
  • Teflon drain cock for easy maintenance
  • High quality distillate
  • Powder coated stand
  • Safety built-in

Features :

  • Silica Heater: The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be rinsed and no damage is caused to the heating element.
  • Inbuilt Safety panel: Consists of Gate valve and Flow Switch, which takes care of power supply failure and water supply failure. Hence the unit automatically shuts off in case of water or power supply failure.
  • Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser
  • Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'o' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly.

See Enlarge



Borosilicate Glass Stills (Pure Hit Still-XL)
Click to Enlarge
Borosilicate Glass Stills (Pure Hit Still-XL)

Interlabs Pure Hit Still XL provides good quality distilled water for use in laboratories. It is designed for reliable continuous operation and it incorporates several new and advanced safety features

Built-in Safety Features:

  • Gate valve to prevent water wastage
  • Flow switch for boiler safety
  • Thermostat for overheat protection
  • Fuse for safety

Features:

  • Built-in Safety controls
  • Abundant Output
  • Efficient Condenser
  • High quality distillate
  • Powder coated stand

Features :

  • Built-in Safety Controls: The unit has built-in safety incorporating the latest features, such as,
    oGate Valve, which shuts off incase of power supply failure, thus preventing water wastage
    oFlow switch, which is provided for boiler safety. It shuts off power supply to the heater, in case of water supply failure.
    oThermostat: The heater is provided with thermostat for overheat protection.
    oFuse is provided for safety in case of voltage fluctuations and short circuit.
    oAdditional On/Off switch with Water failure indicator lamp.
  • Abundant output: The still provides 4 lit/hr of distilled water produced through a power input of 3 KW by a chromium-plated heater, housed in a horizontal Glass boiler.
  • Efficient Condenser: The distilled output is cool ensured by a high efficiency coiled condenser. Temp. of distillate is 25-400C tested at ambient room temperature of 300C
  • High quality distillate: The distillate obtained is of high quality with low conductivity and is pyrogen free.
  • Screw thread connectors are provided for easy plumbing and installation and to avoid the danger of glassware breakage during assembly
  • Powder coated stand: For long, rust free operation.
  • Teflon drain cock: For easy cleaning of the boiler.


Specifications :

Parameters Values
Output 4 lit/hr
Distilled water Quality Reagent Grade III
Conductivity(using raw water) 3.0-4.0 x 10-6S/cm
Conductivity(using treated water) 1.5-2.0 x 10-6S/cm
PH 5.5 - 6.0
Distillate Quality Pyrogen free
Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 3 KW heater
Cooling water reqd 1-2 lit/min
Min. Pr. 3 p.s.i
Dimensions (w x d x l) 500 x 200 x 600 (mm)
Nett. Weight 6 kgs (app.)

See Enlarge



Borosilicate Glass Stills (EasyStill 2000 SDQ XL PTS)
Click to Enlarge
Borosilicate Glass Stills (EasyStill 2000 SDQ XL PTS)

Interlabs Easy-Still Mark 2000 SDQ/DDQ XL PTS, single and double distillation units provide good quality distilled water with an output of 2.0 lit/hr.

Easy-Still's unique features such as silica heater, PTS (Pressure-Temperature Switch), Teflon screw cock for boiler, and screw thread connectors, makes it an ideal, efficient and economical equipment to obtain pure distilled water for use in general laboratories and in numerous other end uses.

Special Safety Features:

  • PTS for safety: The unit is provided with PTS(Pressure Temperature Switch) to shut off power supply in case the water level in the boiler falls below the heater level.
  • Fuse:Fuse is provided for safety in case of high voltage and short circuit.

Features :

  • Silica Heater:The silica heater helps in easy cleaning of the boiler. The scaling formed can easily be acid rinsed.
  • Teflon screw cock:A Teflon screw cock is incorporated for in-situ cleaning and draining of the boiler
  • Efficient Condenser:The distilled output is cool ensured by a highly efficient borosilicate coiled condenser. The temperature of the distillate is around 25 - 45oC.
  • Screw thread connectors: All plumbing connections to the equipment including that to the Silica Heater are made via Screw thread connectors with silicon rubber 'O' ring, which helps in easy installation and avoids the danger of glassware breakage during assembly.
  • Powder coated stand: The stand is powder coated for long rust free operation.
  • Easy and safe to use


Specifications :

Parameters Values for SDQ Values for DDQ
Output 2.0 lit/hr 2.0 lit/hr
Distilled water Quality- -
Conductivity (using raw water) 3.0 - 4.0 X 10-6S/cm 0.8 X 10-6S/cm
Conductivity (using treated water) 1.5 - 2.0 X 10-6S/cm 0.7 X 10-6S/cm
PH 5.5 - 6.0 Not applicable*
Distillate Quality Pyrogen free Pyrogen free
Electrical Power 220/240 Volts, 50 - 60 Hz, Single Phase, 1500 W Silica heater 220/240 Volts, 50 - 60 Hz, Single Phase, 2X1500 W Silica heater
Cooling water reqd 1-3 lit/min2-4 lit/min
Min. Pr. 3 p.s.i 3 p.s.i
Dimensions (w x d x l) 250 x 180 x 450 (mm) 2(250 x 180 x 450) mm

See Enlarge



ALL QUARTZ DOUBLE DISTILLER
Click to Enlarge
ALL QUARTZ DOUBLE DISTILLER

The first All Quartz Double Distiller was introduced by us in the year 1980 for obtaining high purity water. Until then double distilled water was prepared by two seperate operations using conventional glass water still, requiring elaborate handling and often leading to contamination.

The distillate obtained from glass double distiller could never be used with satisfactory results for analysis in experiments, where trace elements were to be determined in certain biochemical reactions where studies in enzymes have to be conducted. These disadvantages vanished with the introduction of All Quartz Double Distiller made from electronic grade transparent fused quartz.

Features :

  • Quartz distiller, Demountable boiler.
  • Compact design, Dual safety cutout(optional).
  • High purity, low conductivity, Pyrogen free distillate.
  • Easy service and maintenance due to Demountable model.
  • Distillate is free of Heavy metals.

Specifications :

Model No.AQDD-10P/DBAQDD-15P/DB AQDD-20P/DB AQDD-25P/DBAQDD-30P/DB AQDD-50P/DB
Output Capacity (Approx.) 1 ltr/hr1.5 ltr/hr2 ltr/hr 2.5 ltr/hr 3.0 ltr/hr 5.0 ltr/hr
Electrical Power Reqd.220/240 V, Single Phase, 2.0 KW Heater220/240 V, Single Phase, 3.0 KW Heater220/240 V, Single Phase, 3.5 KW Heater220/240 V, Single Phase, 4.5 KW Heater220/240 V, Single Phase, 5.0 KW Heater440 V, Two Phase, 8.0 KW Heater
Cooling Water Consumption40 lit/hr 50 lit/hr 65 lit/hr 70 lit/hr 100 lit/hr 150 lit/hr

Quality of Distillate

Title All Quartz Double Distiller
Specific Conductivity at 250C less than 0.4 x 10-6S/cm
PH at 250C *Not applicable
Total Organic Carbon (TOC) mg/lit **Not detected
Organic Matter mg/lit NIL
Total Solids (mg/lit) 0.1 mg/lit
Silica (mg/lit) less than 0.01 mg/lit
KMnO4 color retention 60 mins
UV absorbance at 254 nm 0.007
Distillate Quality Pyrogen Free
Total Plate Count Zero
Standard Plate Count Zero
Endotoxin less than 0.25 EU/ml
Yeast and mould Zero
Distillate Temperatur