Computer Table, Acouatic Collection Net (d-shaped) Manufacturers, Insect Spreading Board, White Marker Board Exporters, Slide Holder Exporters, Table Document Sorter, Chromotagraphy Chamber India, Slide Cabinet Horizontal (flat Position) India, Photoperiodic Simulation /tissue Culture Rack, Insect Split Cage India, Insect Collection Net (super Deluxe) India, Projection Slide Sorter Manufacturers, Computer Printer Table Manufacturers, Microscope / Instrument Cover (perspex) Exporters, Slide Box (unique) Abs Plastic Manufacturers, Laboratory Equipments India

The Equipment is fabricated out of reinforced pest and weather resistant Board which is clad in white mica laminated sheet. Environmental air is drawn by a balanced blower through prefilters and is thrown to work chamber through high efficiency HEPA filter retaining particulate and Biological contaminants larger than 0.3 microns. Table top is covered with stainless steel/ mica sheet.The side panels & front door is made of thick clear imported plexy glass sheet including U.V. Tube FluorescentTube Light, Gas Cock and manometer, C.R fiting complete. To work on 220/230 V AC 50 HZ.

See Enlarge

Click to Enlarge

LAMINAR AIR FLOW MODULE (VERTICAL)

Same as Horizontal model, but the air drawn vertically on the Work stage, An Exhaust system can be provided (optional) at the bottom of the Unit to throw the air outside the Work place.

See Enlarge

Click to Enlarge

LAMINAR AIR FLOW (BIO-SAFETY CABINET)

Ultra Clean Air Work Station, Vertical type, made of Pest & weather resistant board which is clad in laminated sheet Work stage thoroughly lined with Stainless Steel (S.S. - 304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E.RA. filtered clean exhaust duct. Efficiency up to 99.97%, retaining particles up to the size of 0.03 micron. To work on 220 230 V AC 50 Hz.

See Enlarge

LAMINAR AIR FLOW (HORIZONTAL) STAINLESS STEEL (SS-316)

The equipment is fabricated made from rectangular/square pipe than fix with water proof thick board covered with mica. Environmental air is drawn by a balanced blower through prefilters retaining more than 85% of particles and is thrown to work chamber through high efficiency HEPA filters retaining particulate and Biological contaminants larger than. 0.3 microns. Table top is covered with stainless steel (SS-316) sheet. Front door is folding type & Side panel are fixed and made of clear thick plexi glass sheet. Including U.V. Tube, Fluorescent tube light, gas cock & manometer. To work on 220/230 V AC 50Hz.

See Enlarge

LAMINAR AIR FLOW (VERTICAL) STAINLESS STEEL

Same as Horizontal model, but the air drawn vertically on the Work stage, An Exhaust system can be provided (Optional) at the bottom of the Unit to throw the air outside the Work. place.

See Enlarge

LAMINAR AIR FLOW (BIO SAFETY) . STAINLESS STEEL

Ultra Clean AirWork Station, Vertical type, made of sturdy board, all sides covered with Mica, Work stage thoroughly lined with Stainless Steel (S.S. -304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E. P.A. filtered clean exhaust duct. Efficiency u to 99.97%, retaining particles up to the size oF0.03 micron. To work on 220 / 230V AC 50 Hz.

See Enlarge

Click to Enlarge

FUME HOOD (WOODEN)

Fume Exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases, vapours, mist etc. to protect personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant Duroboard clad in Mica Lamination from outside, Inner chamber finished in chemically-resistant Epoxy paint and work surface covered with glazed tiles and counter balanced slid ' ing Sash Fluorescent tubes are fitted inside. A gas tap and an electric plug is also provided to work on 220/230 V AC 50 Hz power plug.

A work bench/ Table (optional) to install the equipment any where in the lab can be supplied. The work bench is fabricated out of square steel pipe or hard wood and have a cupboard and a drawer.

See Enlarge

Click to Enlarge

FUME HOOD (mild STEEL)

Fabricated out.of thick c.r.c.a. sheet, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.

Size- Wdt. Dpt. Ht. Exhaust Duct No. 122

01 4' x 2.6'x 31/2' 3" dia
02 5' x 3' x 31/2' 4"
03 6' x 3' x 31/2' 4"

See Enlarge

Click to Enlarge

INOCULATION (U.V.TRANSFER) CHAMBER

Economical equipment for transfer of material/ tissue and to be used as dry-box and dust proof environmental enclosure. Made of thick board, covered with mica laminated inside Epoxy paint. Fluorescent tube light and U.V. tube inside with covered rectangular opening for transfer of material with two round holes for handling. Perspex sheet cover has been provided for viewing operations. Inside of chamber is painted with Epoxy paint.

01 Size 100 x 60 x 50 cm.(40" x 24" x 20")
02 70 x 50 x 40 cm.(27" x 20" x 16")

See Enlarge

Click to Enlarge

FUMIGATION CHAMBER

Versatile chamber for fumigating for sterilization with insecticide for preservation clothes, plants, old books etc. Made of sturdy board, mica covered, Epoxy coated from inside with fume circulator of electric motor. Top cover tightened with clamps. One drawer is provided for keeping perti-dish for fumigants chemical. Castor wheel provided for easy movement.

01 Size- 90 x 60 x 80 cm.(36" x 24" x 32")
02 75 x 50 x 65 cm.(30" x 20" x 26")
03 50 x 40 x 55 cm.(24" x 16" x 22")

See Enlarge