Laboratory Supplies - Glassware & Plasticware

Showing 1–12 of 25 results

• 
  Laboratory Supplies - Glassware & Plasticware

  Atomic Model Set (PP)

  These sets consists of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds. These are available in two different sets: SENIOR SET: This set consists of 185 lugs & 370 balls of prescribed colours & sizes packed in a moulded box having separate space for every particular colour & size of ball.JUNIOR SET: This set consists of 37 connecting lugs & 75 balls of different colours & sizes packed in a moulded box.

• 
  Laboratory Supplies - Glassware & Plasticware

  Bottle Top Dispenser

  Supreme Plus is the most advanced next generation highly robust and reliable bottle top dispenser designed through years of research. Supreme Plus has a recirculation valve for redirecting the liquid into the bottle for bubble free dispensing without any loss of reagent. Supreme Plus has a smooth and soft plunger for easy working in difficult laboratory conditions. Fully Autoclavable.

• 
  Laboratory Supplies - Glassware & Plasticware

  Carboy With Stop Cock and without stopcock

  Carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable Carboys are provided with handles making it convenient while carrying or pouring purposes.These polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys & are used for storing & dispensing distilled water & other laboratory solutions. for

• 
  Laboratory Supplies - Glassware & Plasticware

  Glass Vacuum Desiccators

  Desicctors are made of Polypropylene and Polycarbonate. These autoclave vaccum desicators can hold vaccum upto 740mm of Hg for 24 hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, gives a crystal clear view of the desiccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self lubricating PTEE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing.

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Beakers Plastic

  Thses Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclave Beakers have prominently raised graduations on the outer surface. Pouring solution becomes very conveninent because of its tapered spout. These beakers are available in following capacities

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Conical Flask

  Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving. These flasks are available in following capacities:

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Draining Rack

  Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Flasks

  We have different type of laboratory Flask, made from Borosilicate Glass. Our wide range of laboratory flask includes Erlenmeyer flask, Conical Flask, Volumetric Flask with glass stopper/ pp stopper, Measuring Flask, Boiling Flask (round bottom flask with narrow neck/wide neck/ wide neck with joint, Retort Flask, Round Bottom Flask with short neck/ 2 neck/ 3angular neck/3parellel neck, Flat Bottom Flask with narrow/wide neck with beaded rim, Distillation Flask, Iodine Flask, Filtration Flask in wide range of capacities starting from25ml – 20000ml.

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Glass Desiccator

  Plain Dessiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight.

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Plastic Beaker

  Made of polypropylene, these disposable Containers are used for collecting samples of sputum or urine etc. Graduated on the outer surface, these conatiners have cap that work in apress & fit manner & make these container leakproof. These disposable containers are E.T.O. sterilized. These containers are available in following capacities:

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Polypropylene Carboy

  Adding in line of Aspirators, these polypropylene Carboys are autoclave, dependable & durrable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions. These carboys are available in following capacities: 10-20 L

• 
  Laboratory Supplies - Glassware & Plasticware

  Laboratory Tray (PP)

  Laboratory Tray is moulded in polyproplene which is multipurpose tray that can be used for sterilizing, drying glassware, porcelainware & other laboratory instruments. These steam autoclavalable trays have tapered walls which prove good for nesting.