6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Experimental Set Virtual Work

Using this experimental set the deformation of a loaded bending bar by forces and moments is considered using the principle of virtual work. The set is intended for use with the universal testing frame . The set contains a test bar that can be clamped at both ends. In this way statically defined or undefined cases can be investigated as required. Forces or moments can be applied at any position, this feature permits different load cases to be investigated. For the determination of forces and deformation mech. dial gauges are used. An additional bearing with a dynamometer is used for the direct measurement of forces on the bar.

SKU: 759a8fd3b6ce Category:
Request a Quote

Experimental Set Virtual Work

Interlabs presents Experimental Set Virtual Work, listed under our Engineering Mechanics and machi range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

Using this experimental set the deformation of a loaded bending bar by forces and moments is considered using the principle of virtual work. The set is intended for use with the universal testing frame . The set contains a test bar that can be clamped at both ends. In this way statically defined or undefined cases can be investigated as required. Forces or moments can be applied at any position, this feature permits different load cases to be investigated. For the determination of forces and deformation mech. dial gauges are used. An additional bearing with a dynamometer is used for the direct measurement of forces on the bar.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Experimental Set Virtual Work is listed in the Engineering Mechanics and machi category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Engineering Mechanics and machi.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Experimental Set Virtual Work.

Related products

  • Placeholder
    Engineering Mechanics and machi

    Torsion Tester 30 Nm

    Using this unit, metal test bars are twisted to destruction. The test moment and the angle of twist are recorded during this process. Test bars made of different materials with varying lengths are included. The test moment is applied manually using a hand wheel and a worm drive. Measurement is performed with a strain gauge torsion shaft, the deformation of which is compensated. The measurement can be read off directly in Nm on a digital display on the measuring amplifier. For adaption to different length specimens, the measurement jig can be slid along the stiff frame. Using a calibration unit at the start of the experiment, it is possible to generate a defined torque. The angle of twist is determined using a graduated scale and and a revolutions counter. Commercially available 1/2″ square drive sockets, 17mm across flats, are used as specimen holders.

  • Placeholder
    Engineering Mechanics and machi

    Cam Analysis Apparatus

    The allows the dynamic investigation of cam mechanisms, as used in motors for actuation of the valves. The cam mechanism consists of 4 interchangeable cam plates and 2 different tracers. A mass and a spring are used to simulate the valve. In order to demonstrate the so-called “valve wobble”, the spring rate, mass and speed are adjustable within broad limits. A plotter allows the actual lift curves to be recorded. The open design allows the observation of every detail of the movement process. A stroboscope (not supplied) can be used to provide a particularly impressive view of the movement process and lift. The unit is intended for demonstration purposes in technical education. It is not suitable for use as a test stand for fatigue testing.

  • Placeholder
    Engineering Mechanics and machi

    Winch

    Allows to study a winch concerning its lifting velocity and its load transmission. Additionally, the functioning of a back-run safety device is demonstrated. Load transmission and efficiency can be determined by force equilibrium. Both rope drums are ball-bearing mounted. The forces are generated by sets of weights and can be quickly and easily varied.

  • Placeholder
    Engineering Mechanics and machi

    Experimental Set Redundant Truss

    This set for use with the universal test frame enables the distribution of forces in redundant trusses to be investigated. Due to the range of different fixed length members, numerous plane trusses can be assembled. These are made redundant by the insertion of an additional member of variable length. All members are equipped with full bridge strain gauges. The measuring amplifier is required to display the forces in the members and to further process the measured values on a PC. A set of cables to connect strain gauges and the amplifier is included. The trusses can be loaded using a spindle drive with a ring dynamometer and strain gauge.

Scroll to Top