Related products

• 
  Fluid Mechanics

  Thermal Engineering Scientific Equipment

  Anodized aluminium structure and panel in painted steel (epoxi paint). Diagram in the front panel. Vacuum-meter of range (-9800 [mm H2O] to 0). Vacuum-meter of range (-1000 [mm H2O] to 0).Manometer of range (0 to 1000 [mm H2O] ). Manometer of range (0 to 2.5 [bars]). Mobile Piston (syringe). 8 valves. Non-return valve. Polyurethane tubes. This system is supplied with atm, bares, psi, mmHg, mm H2O, conversion tables. This system allows the calibration of 6 sensors (same type) simultaneously. Manuals: This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.Dimensions: 720 x 300 x 570 mm. approx. Weight: 15 Kg. approx.

• 
  Fluid Mechanics

  Stability Of A Floating Body

  This simple apparatus for determining the metacentre of a model hull is particularly suitable for experiments in small groups. The experiments are performed in a tank filled with water. A transparent hull is used with a rectangular cross-section. Horizontal and vertical sliding weights enable the center of gravity to be adjusted. The position of the sliding weights as well as the draught of the floating body can be read on scales. An inclinometer indicates the angle of heel.

• 
  Fluid Mechanics

  Computer Controlled Centrifugal Pump Bench

  1.-Demonstration of a centrifugal water pump in operation. 2.-Introduction to pump speed laws. 3.-Obtaining of curves H(Q), N(Q) and Eff%(Q). 4.-Simultaneous representation of H(Q), N(Q) and Eff%(Q). 5.-Obtaining the map of a centrifugal pump. 6.-Adimensional study of magnitudes H *, N * and Q *. 7.-Cavitation test and obtaining of curves NPSHr. Additional practical possibilities: 8.-Sensors calibration. Other possibilities to be done with this Unit: 9.-Many students view results simultaneously. To view all results in real time in the classroom by means of a projector or an electronic blackboard. 10.-Open Control, Multicontrol and Real Time Control. This unit allows intrinsically and/or extrinsically to change the span, gains; proportional, integral, derivate parameters; etc in real time. 11.-The Computer Control System with SCADA allows a real industrial simulation. 12.-This unit is totally safe as uses mechanical, electrical and electronic, and software safety devices. 13.-This unit can be used for doing applied research. 14.-This unit can be used for giving training courses to Industries even to other Technical Education Institutions. 15.-Control of the PBCC unit process through the control interface box without the computer. 16.-Visualization of all the sensors values used in the PBCC unit process. – By using PLC-PI additional 19 more exercises can be done. – Several other exercises can be done and designed by the user.

• 
  Fluid Mechanics

  Computer Controlled Water Tunnel

  Water tunnel of 500*500mm, principal characteristics: * Adequate Size for flow visualizations on standard models of planes. * Useful for teaching and development projects. * Top quality vein, uniformity and low turbulence level. * Low operation and maintenance cost. *The water tunnel of 500*500 mm, of low turbulence level, is specifically designed for carrying out visualization tests on threedimensional models, though, of course, they can also be used on two-dimensional models. *As it is a closed circuit, it operates continuously and uses the same water, although it may be necessary to renew it once it has lost its transparency due to the use of colorings. However, if the technique of the hydrogen bubble is used as tracer this problem can also be avoided. *Its dimensions and low operating costs make it suitable for teaching as well as for research or industrial use. Assorted systems for registering images and taking measurements can be incorporated when necessary.