6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Computer Controlled Experimental Impulse Turbine

1.-Visual examination of a small turbine.2.-Comparison of turbine performance, including specific consumption, when using: Throttle control. Nozzle control. 3.-Production of torque/speed and power/speed curves. 4.-Determination of the isentropic efficiency of a turbine and plotting the end states on a temperature/entropy diagram.5.-Application of the First Law to a simple open system undergoing a steady flow process.6.-Construction of retardation curve and the determination of resisting torques due to bearing frictions, disc friction and windage, at different speeds.

SKU: dfacd2d116c0 Category:
Request a Quote

Computer Controlled Experimental Impulse Turbine

Interlabs presents Computer Controlled Experimental Impulse Turbine, listed under our Fluid Mechanics range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

1.-Visual examination of a small turbine.2.-Comparison of turbine performance, including specific consumption, when using: Throttle control. Nozzle control. 3.-Production of torque/speed and power/speed curves. 4.-Determination of the isentropic efficiency of a turbine and plotting the end states on a temperature/entropy diagram.5.-Application of the First Law to a simple open system undergoing a steady flow process.6.-Construction of retardation curve and the determination of resisting torques due to bearing frictions, disc friction and windage, at different speeds.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Computer Controlled Experimental Impulse Turbine is listed in the Fluid Mechanics category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Computer Controlled Experimental Impulse Turbine.

Related products

  • Placeholder
    Fluid Mechanics

    Demonstration Pelton Turbine

    A characteristic of impulse turbines is the complete conversion of pressure into kinetic energy at the exit of the supply nozzle. The turbine consists of a housing, which is transparent on one side, the Pelton bucket wheel and an adjustable supply nozzle. The turbine is loaded with a belt brake. The torque is measured using spring balances located on the braking belt. The manometer fitted to the unit measures the water pressure applied. The pressurised water supply and flow rate measurement is provided . Alternatively, the arrangement can also be operated from the laboratory mains supply.

  • Placeholder
    Fluid Mechanics

    Thermal Engineering Scientific Equipment

    Anodized aluminium structure and panel in painted steel (epoxi paint). Diagram in the front panel. Vacuum-meter of range (-9800 [mm H2O] to 0). Vacuum-meter of range (-1000 [mm H2O] to 0).Manometer of range (0 to 1000 [mm H2O] ). Manometer of range (0 to 2.5 [bars]). Mobile Piston (syringe). 8 valves. Non-return valve. Polyurethane tubes. This system is supplied with atm, bares, psi, mmHg, mm H2O, conversion tables. This system allows the calibration of 6 sensors (same type) simultaneously. Manuals: This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.Dimensions: 720 x 300 x 570 mm. approx. Weight: 15 Kg. approx.

  • Placeholder
    Fluid Mechanics

    Principles of Hydraulics

    The is part of a series of units that enable experiments to be performed on flow processes with the aid of a computer. Here several areas of incompressible flows can be investigated. After the recording of a pump characteristic curve, experiments on the topics of pipe flow and flow in open flumes can be performed. Water flows through a Venturi tube, an orifice, a bend, or a kink. During this process the pressure loss is measured and compared with the flow through a straight pipe. On flumes experiments can be performed on the open channel and on a channel with weir structures. Two different weir structures are supplied . The Data Logging Unit is necessary for the operation of the Computer Linked Hydraulics Bench. If power data is to be displayed, the Digital Power Meter is required.

  • Placeholder
    Fluid Mechanics

    Pipe Friction Apparatus

    The experimental set-up can be used on its own or with the Basic Hydraulics Bench. A supply of water is all that is required for operation. The unit is suitable for measuring pipe friction losses for laminar and turbulent flows. The experimental set-up is clearly laid out on a training panel. For investigations on laminar flow, a head tank is used for the water supply, whilst for turbulent flow, the supply is provided via the Basic Hydraulics Bench directly (or the water mains). The water flows through a pipe section, the flow is adjusted using reducing valves. The connection to the required measuring device is made via pressure tappings.

Scroll to Top