6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Computer Controlled Aerodynamic Tunnel

* Adequate size for demostration tests and teaching. * Suitable for three-dimensional models.* Test Chamber builts with transparent materials. * Low operation and maintenance cost. * Suitable for smokes visualization test. * AC motor-ventilator gropu, monophasic, with frequency variator. *The Aerodynbamic Tunnel of 1200*1200 mm section for testing, witha longitude of 2000 mm is of the Eiffeltype, aspirate and of open circuit, and allows us to carry out tests of measuring formces and aerodynamic field on models of structures, construcitons, land vehicles and small planes. * Its power plant, formed by 4 standard type ventilators, of 10 CV of power each one and 900 mm in diameter, has kept the final cost of the product low, while at the same time that assuring a simple and economicmaitenance. Nevertheless, this aspect does not prejudice the quality of the vein, of great uniformity and low turbulence level, thanks also to the adequate design of the contraction, neither does it affect the speed that is reached, this being about 36m/s in a vacuum.

SKU: ee35e9cde1ac Category:
Request a Quote

Computer Controlled Aerodynamic Tunnel

Interlabs presents Computer Controlled Aerodynamic Tunnel, listed under our Fluid Mechanics range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

* Adequate size for demostration tests and teaching. * Suitable for three-dimensional models.* Test Chamber builts with transparent materials. * Low operation and maintenance cost. * Suitable for smokes visualization test. * AC motor-ventilator gropu, monophasic, with frequency variator. *The Aerodynbamic Tunnel of 1200*1200 mm section for testing, witha longitude of 2000 mm is of the Eiffeltype, aspirate and of open circuit, and allows us to carry out tests of measuring formces and aerodynamic field on models of structures, construcitons, land vehicles and small planes. * Its power plant, formed by 4 standard type ventilators, of 10 CV of power each one and 900 mm in diameter, has kept the final cost of the product low, while at the same time that assuring a simple and economicmaitenance. Nevertheless, this aspect does not prejudice the quality of the vein, of great uniformity and low turbulence level, thanks also to the adequate design of the contraction, neither does it affect the speed that is reached, this being about 36m/s in a vacuum.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Computer Controlled Aerodynamic Tunnel is listed in the Fluid Mechanics category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Computer Controlled Aerodynamic Tunnel.

Related products

  • Placeholder
    Fluid Mechanics

    Principles of Hydraulics

    The is part of a series of units that enable experiments to be performed on flow processes with the aid of a computer. Here several areas of incompressible flows can be investigated. After the recording of a pump characteristic curve, experiments on the topics of pipe flow and flow in open flumes can be performed. Water flows through a Venturi tube, an orifice, a bend, or a kink. During this process the pressure loss is measured and compared with the flow through a straight pipe. On flumes experiments can be performed on the open channel and on a channel with weir structures. Two different weir structures are supplied . The Data Logging Unit is necessary for the operation of the Computer Linked Hydraulics Bench. If power data is to be displayed, the Digital Power Meter is required.

  • Placeholder
    Fluid Mechanics

    Properties Of Fluids And Hydrostatics Bench

    With this well equipped hydrostatics bench, numerous experiments on the topic of the hydrostatics of liquids and gases can be carried out. A pipe section and various pressure measuring devices are fitted to a laboratory trolley with a demonstration panel, working area and cabinet. Various measuring containers are integrated into the pipe section. The sealed water circuit and pump with supply tank permit experiments to be performed independent of a mains water connection. This feature makes the bench particularly suitable for use in seminars rooms and lecture theatres. Further experimental apparatus are included in the cabinet, e.g. a device for determining the centre of pressure of a column of water. This enables the pressure on a weir to be determined, amongst other aspects.

  • Placeholder
    Fluid Mechanics

    Methods of Flow Measurement for Engineering Lab Equipment

    The Flow Meter Demonstration Apparatus contains different flow rate measurement devices that are clearly laid out with the associated pipework on a metal sheet. So that the function can be observed, the measuring devices are made of transparent plastic. The flow rate is measured using a nozzle, orifice, venturi flow meter and variable-area flow meter. To determine the flow rate using a nozzle/orifice and with the venturi flow meter, a differential pressure measuring device is required. This is included in the form of a multiple tube manometer so that the pressure curve along the venturi flow meter can also be displayed. The apparatus is placed on the Basic Hydraulics Bench, this provides the water supply to the unit.

  • Placeholder
    Fluid Mechanics

    Pitot Static Tube Module

    1) Stainless structure.2) Screws, nuts, plates and all the metallic elements in stainless steel.3) Diagram in the front panel with similar distribution to the elements in the real unit.4) Quick connections for adaptation to feed hydraulics source.

Scroll to Top