6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Capacity Control Methods In Refrigeration

This unit demonstrates several possible ways of regulating the capacity. The cooling capacity of the system with 2 separate evaporators can be changed by adjusting the speed of the open compressor. The compressor drive motor is controlled using a frequency converter. The evaporators are in individual insulated compartments. In the first compartment the temperature is regulated using an intake pressure controller and thermostat (mechanical regulation), in the second compartment using a case controller (electronic regulation). In both cooling compartments a cooling load can be generated using an electrical heater. Fans ensure even temperature distribution. A bypass capacity regulator is installed in the refrigerant circuit that connects the high and low pressure sides of the compressor. The system is equipped with temperature sensors at all relevant measuring points. The signals provided by these sensors are also used by the case controller.

SKU: 719748f97b88 Category:
Request a Quote

Capacity Control Methods In Refrigeration

Interlabs presents Capacity Control Methods In Refrigeration, listed under our Refrigeration and Air Condition range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

This unit demonstrates several possible ways of regulating the capacity. The cooling capacity of the system with 2 separate evaporators can be changed by adjusting the speed of the open compressor. The compressor drive motor is controlled using a frequency converter. The evaporators are in individual insulated compartments. In the first compartment the temperature is regulated using an intake pressure controller and thermostat (mechanical regulation), in the second compartment using a case controller (electronic regulation). In both cooling compartments a cooling load can be generated using an electrical heater. Fans ensure even temperature distribution. A bypass capacity regulator is installed in the refrigerant circuit that connects the high and low pressure sides of the compressor. The system is equipped with temperature sensors at all relevant measuring points. The signals provided by these sensors are also used by the case controller.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Capacity Control Methods In Refrigeration is listed in the Refrigeration and Air Condition category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Refrigeration and Air Condition.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Capacity Control Methods In Refrigeration.

Related products

  • Placeholder
    Refrigeration and Air Condition

    Set of Training Panels Expansion

    Consists of 15 different training panels that can be mounted modularly on the basic unit. These panels enlarge the scope of experiments of realised with the basic unit, training panels included in and accessories in comprises more complex refrigerant components as capacity controller, suction pressure controller, defrost timer, four-way reversing valve and case controller. A four-way reversing valve is used to reverse the cycle. A frozen evaporator can be defrosted with a reversed cycle. The evaporator is then temporarily used as a condenser.

  • Placeholder
    Refrigeration and Air Condition

    Reverse Cycle Refrigeration Training System

    The contains a hermetic compressor, 4 heat exchangers, 3 expansion valves and 4 different interchangeable capillaries. The unit can be operated in different modes. 11 manually operated valves allow corresponding changes to be made to the refrigeration circuit. The relevant measured values are displayed directly on indicator instruments. Therefore, sequences and consequences of switching operations within a cooling unit can be directly investigated. Sight glasses in the refrigerant circuit allow direct observation of the refrigerant status. A coaxial tube bundle heat exchanger can be operated as a counterflow condenser or as a parallel flow evaporator. This heat exchanger is used to heat or cool a glycol/water mixture circuit. Refrigerating loads are created by different fan speeds on the finned tube evaporators.

  • Placeholder
    Refrigeration and Air Condition

    Refrigerant Compressor Fault Simulator

    The table unit is part of a series designed for training in refrigeration engineering. The unit addresses electrical faults as they can occur in the operation of a commonly available refrigerant compressor. The faults are simulated using pushbuttons on the front panel of the unit. Other components as, a switch box with the starting relay, running capacitor, starting capacitor and motor protection circuit breaker are also arranged on the front panel. The measured points in the electrical circuit are accessed using laboratory sockets. A circuit diagram printed on the front panel provides information on the circuit.

  • Placeholder
    Refrigeration and Air Condition

    Domestic Air Conditioning Controls

    The unit facilitates the investigation of electrical components used in air conditioning. This includes fault simulation and faultfinding on a compressor and fan motor. These devices are simulated with this unit. During this process the switch state of the equipment is indicated by signal lamps that are arranged on the display and control panel. The related starting, safety and control devices are also clearly laid on the front panel. Laboratory sockets facilitate access to measured points in the electrical circuit. The simulation of 15 faults that can be enabled via the electrical system is performed using push buttons. The series was designed primarily for training on refrigeration and air conditioning systems and is particularly suitable for use in small student groups.

Scroll to Top