6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Claw Mechanism Instruments

Claw Mechanism Instruments

One of sixteen mechanisms built on an A3 board equally suitable for the classroom, drawing office or laboratory. The principal components are made from amber coloured Perspex, pivoted with hollow rivets, and mounted on a white melamine board for contrast and visibility. To see the mechanisms move is far more instructive and convincing than listening to a static lecture. The hollow rivets accept a pencil for transferring the loci of the joints to a sheet of paper, clipped to the board.A pair of gear whels pivoted at O and P run in mesh at the same speed. On one wheel a pivot carries a moving arm while a pin on the other wheel slides in a curved slot in the arm. An extension to the arm terminates in a fine claw which traces out a loop with a flat side each time the wheels make one revolution.

SKU: 4c44284faf72 Category:
Request a Quote

Claw Mechanism Instruments

Interlabs presents Claw Mechanism Instruments, listed under our Physics Mechanism Instruments range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

One of sixteen mechanisms built on an A3 board equally suitable for the classroom, drawing office or laboratory. The principal components are made from amber coloured Perspex, pivoted with hollow rivets, and mounted on a white melamine board for contrast and visibility. To see the mechanisms move is far more instructive and convincing than listening to a static lecture. The hollow rivets accept a pencil for transferring the loci of the joints to a sheet of paper, clipped to the board.A pair of gear whels pivoted at O and P run in mesh at the same speed. On one wheel a pivot carries a moving arm while a pin on the other wheel slides in a curved slot in the arm. An extension to the arm terminates in a fine claw which traces out a loop with a flat side each time the wheels make one revolution.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Claw Mechanism Instruments is listed in the Physics Mechanism Instruments category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Physics Mechanism Instruments.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Claw Mechanism Instruments.

Related products

  • Peaucellier Straight Line Motion
    Physics Mechanism Instruments

    Peaucellier Straight Line Motion

    One of sixteen mechanisms built on an A3 board equally suitable for the classroom, drawing office or laboratory. The principal components are made from amber coloured Perspex, pivoted with hollow rivets, and mounted on a white melamine board for contrast and visibility. To see the mechanisms move is far more instructive and convincing than listening to a static lecture. The hollow rivets accept a pencil for transferring the loci of the joints to a sheet of paper, clipped to the board. The exact straight line produced by this set of eight links is achieved by the geometry of the mechanism. ABCD is a rhombus with four equal sides. Points O and P are fixed pivots while OP = OC. A is moved in a straight line as OC rotates.This equipment is part of a range designed to both demonstrate and experimentally confirm basic engineering principles. Great care has been given to each item so as to provide wide experimental scope without unduly complicating or compromising the design. Each piece of apparatus is self-contained and compact. Setting up time is minimal, and all measurements are made with the simplest possible instrumentation, so that the student involvement is purely with the engineering principles being taught.

  • James Watt Straight Line Motion
    Physics Mechanism Instruments

    James Watt Straight Line Motion

    One of sixteen mechanisms built on an A3 board equally suitable for the classroom, drawing office or laboratory. The principal components are made from amber coloured Perspex, pivoted with hollow rivets, and mounted on a white melamine board for contrast and visibility. To see the mechanisms move is far more instructive and convincing than listening to a static lecture. The hollow rivets accept a pencil for transferring the loci of the joints to a sheet of paper, clipped to the board.This early attempt to guide a point P on a machine to move in an approximate straight line consists of three links connected together with fixed pivots at A and D. The mid-point of BC is constrained to move in a nearly straight line.

  • Elliptic Trammel
    Physics Mechanism Instruments

    Elliptic Trammel

    One of sixteen mechanisms built on an A3 board equally suitable for the classroom, drawing office or laboratory. The principal components are made from amber coloured Perspex, pivoted with hollow rivets, and mounted on a white melamine board for contrast and visibility. To see the mechanisms move is far more instructive and convincing than listening to a static lecture. The hollow rivets accept a pencil for transferring the loci of the joints to a sheet of paper, clipped to the board.This apparatus provides two guide slots intersecting at their mid-points at 90 degrees to act as the base lines of the major and minor axes of an ellipse. A trammel bar equipped with two variable position sliders and an end point for tracing the locus enables an ellipse to be drawn.

Scroll to Top