6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Paddle-Wheel Turbine Flowmeter With Indicator

Paddle-Wheel Turbine Flowmeter With Indicator

The principle of operation of this unit is the generation of a angular frequency on a paddle wheel. The flow is deflected by a nozzle onto the paddle wheel, there the kinetic energy is converted into angular motion. The angular frequency is transmitted to an analysis unit, without contact, by a ring magnet and converted there into an analogue voltage signal. This voltage signal corresponds to the actual flow rate and is displayed on a digital display. The operating area of the unit is fitted with a transparent cover and as a result can be clearly seen.

SKU: 5ae3dfe73916 Category:
Request a Quote

Paddle-Wheel Turbine Flowmeter With Indicator

Interlabs presents Paddle-Wheel Turbine Flowmeter With Indicator, listed under our Fluid Mechanics Flow in Pipes range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

The principle of operation of this unit is the generation of a angular frequency on a paddle wheel. The flow is deflected by a nozzle onto the paddle wheel, there the kinetic energy is converted into angular motion. The angular frequency is transmitted to an analysis unit, without contact, by a ring magnet and converted there into an analogue voltage signal. This voltage signal corresponds to the actual flow rate and is displayed on a digital display. The operating area of the unit is fitted with a transparent cover and as a result can be clearly seen.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Paddle-Wheel Turbine Flowmeter With Indicator is listed in the Fluid Mechanics Flow in Pipes category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics Flow in Pipes.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Paddle-Wheel Turbine Flowmeter With Indicator.

Related products

  • Orifice Flowmeter with Transmitter
    Fluid Mechanics Flow in Pipes

    Orifice Flowmeter with Transmitter

    The measuring orifice with electronic differential pressure transmitter is used for applications in which local indication of the measured flow rate is insufficient and the signal is to be transmitted externally. It is then possible, e.g. to directly connect recorders, displays in a measuring centre. The measuring orifice works, as do other orifice measuring devices, in accordance with Bernoulli and the law of continuity. The measurement transducer utilises the principle of a change in capacitance caused by the differential pressure present, this is then converted into a scaled output signal.

  • Pipe Fitting Loss Demo Panel
    Fluid Mechanics Flow in Pipes

    Pipe Fitting Loss Demo Panel

    The experimental arrangement is clearly laid out on a demo panel. The panel is fitted to a laboratory trolley and is thus flexible in use. Only a supply of cold water and a drain are required for operation. For the investigations on the pipes, 10 different pipe sections are provided in which measuring connections with annular chambers are incorporated. The measuring connections are connected to the corresponding measuring equipment using hoses. The pipes can be individually selected for the experiments using connecting hoses. For pressure measurements, a double manometer, manometer panel and a battery operated electronic differential pressure measuring unit are provided. The flow rate is indicated on a variable-area flowmeter. An instruction manual with detailed description of the theoretical background is supplied.

  • Pipe Friction Bench
    Fluid Mechanics Flow in Pipes

    Pipe Friction Bench

    The test stand for investigating losses in pipes is a complete, closed experimental set-up. Due to the installation of the set-up on a laboratory trolley and the closed water circuit with supply tank and pump, the test stand is flexible in use. Eight different pipe sections are provided for the investigations, these are equipped with annular chambers with measuring connections for pressure measurements. The pipes can be individually selected for the investigations using ball-cocks. Double tube manometers are provided for pressure measurements along with a battery-operated electronic differential pressure gauge. The flow rate is indicated on a variable-area flow meter. An instruction manual with detailed description of the theoretical background is supplied.

Scroll to Top