6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Bell Crank Lever Apparatus

A wooden right angled lever with fulcrum at the angle, the horizontal arm is of 75 cm. and vertical arm is of 20 cm., a spring balance with adjustable wing nut is attached to the shorter arm. The lever arm is with scale and grooved at every 5 cm. Complete with one sliding weight of 1 kg.

SKU: 0e4cc7671d53 Category:
Request a Quote

Engineering Apparatus

Bell Crank Lever Apparatus

Bell Crank Lever Apparatus is listed in the Engineering Apparatus range offered by Interlabs. A wooden right angled lever with fulcrum at the angle, the horizontal arm is of 75 cm. and vertical arm is of 20 cm., a spring balance with adjustable wing nut is attached to the shorter arm. The lever arm is with scale and grooved at every 5 cm. Complete with one sliding weight of 1 kg.

Product Overview

The Bell Crank Lever Apparatus is part of the Interlabs range for laboratory, educational or practical applications. The source catalogue description outlines the available product features and intended use.

Key Features

  • A wooden right angled lever with fulcrum at the angle, the horizontal arm is of 75 cm. and vertical arm is of 20 cm., a spring balance with adjustable wing nut is attached to the shorter arm. The lever arm is with scale and grooved at every 5 cm. Complete with one sliding weight of 1 kg.

Applications and Uses

  • Educational, demonstration or laboratory use, as applicable to the product

Buying Information

Before ordering, confirm the intended application, quantity, configuration and any institution-specific requirements. For specifications not stated in the catalogue, request confirmation from Interlabs.

Listed Price: ₹3,600.00

Enquire About Bell Crank Lever Apparatus

Looking for Bell Crank Lever Apparatus for your laboratory, institution or project? Contact Interlabs to discuss product details, availability, pricing and order requirements.

Frequently Asked Questions

What is Bell Crank Lever Apparatus used for?

Educational, demonstration or laboratory use, as applicable to the product. Confirm the intended application with Interlabs.

Can I request more product information?

Yes. Contact Interlabs to confirm specifications, configuration, availability and suitability before ordering.

How can I enquire about bulk or institutional requirements?

Share your required quantity and application with Interlabs to discuss your enquiry.

Related products

  • Placeholder
    Engineering Apparatus

    Single Purchase Winch Crab Apparatus

    Diameter of load drum 85 mm
    – Pulley diameter 230 mm
    – Measuring height 1 meter wooden scale
    – Weight 1 set of slotted weight 1 kg = 200 gm x 5 piece
    1 set of slotted weight 2.5 kg = 500 gm x 5 piece
    – Teeth on spur gear 100
    – Teeth of pinion gear 23
    – Grooved wheel 25 cm diameter

  • Placeholder
    Engineering Apparatus

    Inertia Table Apparatus

    Moment of Inertia Table Setup dramatically represents how moment of inertia posses in any body. Moment of Inertia plays an important role in our daily life. Setup familiarizes with the concept of Moment of Inertia along with rotational motion of objects. Setup explains how it is affected by mass and distance from the axis of rotation. Our setup allows us to determine the moment of inertia of various objects. For time measurement of rotation, the measurement unit is included with manual and automatic mode.

  • Placeholder
    Engineering Apparatus

    Deflection of Beam Apparatus

    The bench mounted apparatus has a steel base with support at ends. The supports can be fitted with knife edges or clamp plates. A steel beam and two load hangers are supplied together with two dial gauges for measuring beam deflections and slopes. This equipment is part of a ranged to both, demonstrate and experimentally confirm basic engineering principles.

  • Placeholder
    Engineering Apparatus

    Universal Force Table

    AS International Force Table consists cast aluminium plate of 400 mm diameter with 360 degree graduated scale. The table is fitted on a case iron stable base with levelling screws to make the table in levelled position. It is possible to fix the table in any desired position. It specially designed with a ring in the centre of the force table, fastened by cords passing over four pulleys, to add extra stability and reduce annoying wobble. Set includes four pulleys, four weight hangers of 100 g each, and an additional sixteen weights (4 x 10g, 4 x 20g, 4 x 50g and 4 x 100g). Weights are made of Brass and chrome plated.

Scroll to Top