6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Single Purchase Winch Crab Apparatus

Diameter of load drum 85 mm
– Pulley diameter 230 mm
– Measuring height 1 meter wooden scale
– Weight 1 set of slotted weight 1 kg = 200 gm x 5 piece
1 set of slotted weight 2.5 kg = 500 gm x 5 piece
– Teeth on spur gear 100
– Teeth of pinion gear 23
– Grooved wheel 25 cm diameter

SKU: 087b3d217368 Category:
Request a Quote

Engineering Apparatus

Single Purchase Winch Crab Apparatus

Single Purchase Winch Crab Apparatus is listed in the Engineering Apparatus range offered by Interlabs. Diameter of load drum 85 mm
– Pulley diameter 230 mm
– Measuring height 1 meter wooden scale
– Weight 1 set of slotted weight 1 kg = 200 gm x 5 piece
1 set of slotted weight 2.5 kg = 500 gm x 5 piece
– Teeth on spur gear 100
– Teeth of pinion gear 23
– Grooved wheel 25 cm diameter

Product Overview

The Single Purchase Winch Crab Apparatus is part of the Interlabs range for laboratory, educational or practical applications. The source catalogue description outlines the available product features and intended use.

Key Features

  • Diameter of load drum 85 mm
  • – Pulley diameter 230 mm
  • – Measuring height 1 meter wooden scale
  • – Weight 1 set of slotted weight 1 kg = 200 gm x 5 piece
  • 1 set of slotted weight 2.5 kg = 500 gm x 5 piece
  • – Teeth on spur gear 100
  • – Teeth of pinion gear 23
  • – Grooved wheel 25 cm diameter

Applications and Uses

  • Educational, demonstration or laboratory use, as applicable to the product

Buying Information

Before ordering, confirm the intended application, quantity, configuration and any institution-specific requirements. For specifications not stated in the catalogue, request confirmation from Interlabs.

Listed Price: ₹8,500.00

Enquire About Single Purchase Winch Crab Apparatus

Looking for Single Purchase Winch Crab Apparatus for your laboratory, institution or project? Contact Interlabs to discuss product details, availability, pricing and order requirements.

Frequently Asked Questions

What is Single Purchase Winch Crab Apparatus used for?

Educational, demonstration or laboratory use, as applicable to the product. Confirm the intended application with Interlabs.

Can I request more product information?

Yes. Contact Interlabs to confirm specifications, configuration, availability and suitability before ordering.

How can I enquire about bulk or institutional requirements?

Share your required quantity and application with Interlabs to discuss your enquiry.

Related products

  • Placeholder
    Engineering Apparatus

    Simple Wheel and Axle Apparatus

    AS International Simple Wheel and Axle Apparatus is designed to demonstrate the basic principles of simple machines and mechanical advantage. It consists of a wheel rigidly fixed to a smaller axle, mounted on a sturdy frame to allow smooth rotation. Loads and efforts are applied using cords and weight hangers to study the relationship between force, load, and radius. This apparatus is commonly used in physics laboratories to verify the law of the wheel and axle and to determine mechanical advantage, velocity ratio, and efficiency.

  • Placeholder
    Engineering Apparatus

    Bell Crank Lever Apparatus

    A wooden right angled lever with fulcrum at the angle, the horizontal arm is of 75 cm. and vertical arm is of 20 cm., a spring balance with adjustable wing nut is attached to the shorter arm. The lever arm is with scale and grooved at every 5 cm. Complete with one sliding weight of 1 kg.

  • Placeholder
    Engineering Apparatus

    Deflection of Beam Apparatus

    The bench mounted apparatus has a steel base with support at ends. The supports can be fitted with knife edges or clamp plates. A steel beam and two load hangers are supplied together with two dial gauges for measuring beam deflections and slopes. This equipment is part of a ranged to both, demonstrate and experimentally confirm basic engineering principles.

  • Placeholder
    Engineering Apparatus

    JIB AND CRANE APPARATUS

    This unit is designed to study forces in jib crane elements. Jib crane has two elements which are attached to a vertical rod. The lower element is called jib and the upper element is termed as tie. Load is applied at the junction of jib and tie to produce tension and compression in tie and jib respectively.The unit consists of a metallic rod which provides the support locations for jib and tie. Load is applied via a hanger on the junction of jib and tie. To measure the deformation in jib and tie, dial gauges are connected to both elements.

Scroll to Top