6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Soldering Desoldering Stations

Showing all 4 results

  • Digital Rework Station 3 in One
    Soldering Desoldering Stations

    Digital Rework Station 3 in One

    Specifications
    Input Voltage 190 V270V
    Output Voltage 24VAC
    Soldering/De-Soldering (W) 60 / 70 watts
    Temp Range 180-480 DegreeC
    Temp Accuracy +- 1 DegreeC
    Tip to ground Potential Under 2 MV
    Tip to ground Leakage under 2
    Vacuum 600mm/Hg
    High Quality 24V DC Pump with 4000 RPM
    SMD Hot Air
    Input Voltage 220 VAC
    Power consumption 300 Watts
    Air Pump Diaphragm Type
    Capacity 24 L/min
    Hot Air Temperature 200 to 550
    Temp Accuracy +- 1 DegreeC

  • Digital Rework Station 4 In One
    Soldering Desoldering Stations

    Digital Rework Station 4 In One

    Input Voltage : 190 V to 270V
    Output Voltage : 24VAC
    Soldering Wattage : 60 Watts
    De-Soldering Wattage : 70 Watts
    Temp range : 180-480°C
    Temp Accuracy : ± 1°C
    Tip to ground potential : Under 2MV
    Tip to ground Leakage : Under 2
    Vacuum : 600mm/Hg
    High Quality 24 DC Pump with 4000RPM

    SMTTweezer : 2 x 25 watts
    SMD Hot Air
    Input Voltage : 220VAC
    Power Consumption : 300 Watts
    Air Pump : Diaphragm Type
    Capacity : 24 L/min
    Hot Air temperature : 200 to 550
    Temp Accuracy : ± 1°C

  • Soldering Station With Japanese Ceramic Heater
    Soldering Desoldering Stations

    Soldering Station With Japanese Ceramic Heater

    Specifications
    Temperature Range 180-480 DegreeC
    I/P Voltage 190-270VAC
    O/P Voltage 24 VAC
    Max Power 60 Watts
    Time to temperature Rising
    From ambient – 350 DegreeC 45 Sec.
    Heater Type Ceramic
    Tip to ground Resistance
    Tip to ground potential
    Auto Sleep Function No
    Temperature Lock mode Optional
    Application General

  • The Complete Rework Station
    Soldering Desoldering Stations

    The Complete Rework Station

    Accurate and advanced temperature, control with micro controller technology
    Set / Read of Operation
    Separate of increase & decrease of temperature, after two seconds the actual read of Temperature will display
    Intelligent power Management auto stand by mains interruption to save power
    Temperature control accuracy ± 1°C
    If sensor fails, power to the element shut off
    The unit designed for digitally calibration thru advanced software
    Burn Proof silicon cable thermal resistance up to 600°C
    Power full DC Pump with 4000 RPM

Scroll to Top