6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Aerodynamic Tunnel

1.-Comprehensive study of subsonic aerodynamics and air flow. 2.-Flux in a nozzle. Determine the characteristics of the pressures field in a nozzle. 3.-Flux in an nozzle. To observe the local characteristics, depending on whether the walls have a curvature or not, as well as happens in the inlet and outlet areas of the contraction. 4.-Flow of an uniform current around a cylinder. 5.-To determine the form of the field of pressures around a cylinder on which a perpendicular to the axis current impacts. 6.-To determine, by the detachment type, if the boundary layer becomes turbulent or remains laminar. 7.-To determine the coefficient of resistance of the cylinder, for the described situation of flow. 8.-To relate all the above mentioned with the Reynolds’s number. studies 9.-Flow of an uniform current around a concave and a convex semi-cylinder. 10.-To determine the field or pressures in the two semi-cylinders, the concave one and the convex one.

SKU: bd45252b1f37 Category:
Request a Quote

Aerodynamic Tunnel

Interlabs presents Aerodynamic Tunnel, listed under our Fluid Mechanics range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

1.-Comprehensive study of subsonic aerodynamics and air flow. 2.-Flux in a nozzle. Determine the characteristics of the pressures field in a nozzle. 3.-Flux in an nozzle. To observe the local characteristics, depending on whether the walls have a curvature or not, as well as happens in the inlet and outlet areas of the contraction. 4.-Flow of an uniform current around a cylinder. 5.-To determine the form of the field of pressures around a cylinder on which a perpendicular to the axis current impacts. 6.-To determine, by the detachment type, if the boundary layer becomes turbulent or remains laminar. 7.-To determine the coefficient of resistance of the cylinder, for the described situation of flow. 8.-To relate all the above mentioned with the Reynolds's number. studies 9.-Flow of an uniform current around a concave and a convex semi-cylinder. 10.-To determine the field or pressures in the two semi-cylinders, the concave one and the convex one.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Aerodynamic Tunnel is listed in the Fluid Mechanics category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Aerodynamic Tunnel.

Related products

  • Placeholder
    Fluid Mechanics

    Pipe Network Bench

    A common problem in the installation of pipe-work is the determination of pressure and flow rate in complex pipe systems. The Pipe Network Bench facilitates the setting up and investigation of different types of pipe system, for instance series and parallel configurations of pipes, their branches and joints. Analogous to Kirchoff’s laws in electrical engineering, the pressure in the pipes corresponds to the electrical voltage, the pressure losses to the electrical resistances. Node analyses can be performed. The pipe systems can be assembled on the top of the experimental module using the pipes and connecting fittings supplied. The experimental module includes a closed water circuit with supply tank and pump, and a tank for volumetric flow rate measurement. Two-tube manometers with different measuring ranges are included for pressure measurements.

  • Placeholder
    Fluid Mechanics

    Pipe Friction Apparatus

    The experimental set-up can be used on its own or with the Basic Hydraulics Bench. A supply of water is all that is required for operation. The unit is suitable for measuring pipe friction losses for laminar and turbulent flows. The experimental set-up is clearly laid out on a training panel. For investigations on laminar flow, a head tank is used for the water supply, whilst for turbulent flow, the supply is provided via the Basic Hydraulics Bench directly (or the water mains). The water flows through a pipe section, the flow is adjusted using reducing valves. The connection to the required measuring device is made via pressure tappings.

  • Placeholder
    Fluid Mechanics

    Computer Controlled Water Hammer Unit

    1.- Characterization of the water hammer phenomenon in pipes.2.- Subduing the water hammer effects. 3.- Calculation of energy losses in pipes. 4.- Influences of the pipe diameter on the speed propagation. 5.- Subduing of the effects of the water hammer through abrupt expansions.Additional practical possibilities: 6.- Sensors calibration. Other possibilities to be done with this Unit: 7.- Many students view results simultaneously. To view all results in real time in the classroom by means of a projector or an electronic blackboard. 8.- Open Control, Multicontrol and Real Time Control. This unit allows intrinsically and/or extrinsically to change the span, gain; proportional, integral, derivate parameters; etc in real time. 9.- The Computer Control System with SCADA allows a real industrial simulation. 10.- This unit is totally safe as uses mechanical, electrical and electronic, and software safety devices. 11.- This unit can be used for doing applied research. 12.- This unit can be used for giving training courses to Industries even to other Technical Education Institutions. 13.- Control of the EGAC unit process through the control interface box without the computer. 14.- Visualization of all the sensors values used in the EGAC unit process. – By using PLC-PI additional 19 more exercises can be – Several other exercises can be done and designed by the user.

  • Placeholder
    Fluid Mechanics

    Stability Of A Floating Body

    This simple apparatus for determining the metacentre of a model hull is particularly suitable for experiments in small groups. The experiments are performed in a tank filled with water. A transparent hull is used with a rectangular cross-section. Horizontal and vertical sliding weights enable the center of gravity to be adjusted. The position of the sliding weights as well as the draught of the floating body can be read on scales. An inclinometer indicates the angle of heel.

Scroll to Top