6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Computer Controlled Centrifugal Fan Teaching Trainer

1.-Measurement of constant-speed fan performance in terms of static and total pressures, rotor speed and motor shaft power, as a function of inlet flow.2.-Calculation of flow with and orifice plate.3.-Calculation of the fan efficiency.4.-Introduction to similarity laws for scale-up 5.-Calculation of the flow by static pressure measurement, dynamic pressure measurement and total pressure depending of the test. 6.-Practices with the different of turbines: with the blades forwards, with the blades backwards and with flat blades.7.-Determination of the fan characteristics curves.8.-Calculation of the typical curve of a fan at a constant turning speed (turbine with blades forwards).9.-Calculation of the typical curve of a fan at a constant turning speed (turbine with blades backwards).10.-Calculation of the typical curve of a fan at a constant turning speed (turbine with flat blades).11.-Measurement of performance at constant speeds.12.-Static pressure increasing.13.-Sensors calibration.Other possible practices (with the optional Set of Accessories):14.-Calculation of flow. Test with discharge duct and nozzle.15.-Calculation of flow. Test with aspiration duct and nozzle.16.-Calculation of the differential flow according to the turbines position in the discharge duct.17.-Calculation of the differential flow according to the turbines position in the aspiration duct.18.-Determination of the fan characteristics curves (with the optional Set of Accessories).19.-Measuring a cooling curve.20.-Determination of the coefficient of heat transfer from the cooling curve.

SKU: 5abf004988d7 Category:
Request a Quote

Computer Controlled Centrifugal Fan Teaching Trainer

Interlabs presents Computer Controlled Centrifugal Fan Teaching Trainer, listed under our Fluid Mechanics range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

1.-Measurement of constant-speed fan performance in terms of static and total pressures, rotor speed and motor shaft power, as a function of inlet flow.2.-Calculation of flow with and orifice plate.3.-Calculation of the fan efficiency.4.-Introduction to similarity laws for scale-up 5.-Calculation of the flow by static pressure measurement, dynamic pressure measurement and total pressure depending of the test. 6.-Practices with the different of turbines: with the blades forwards, with the blades backwards and with flat blades.7.-Determination of the fan characteristics curves.8.-Calculation of the typical curve of a fan at a constant turning speed (turbine with blades forwards).9.-Calculation of the typical curve of a fan at a constant turning speed (turbine with blades backwards).10.-Calculation of the typical curve of a fan at a constant turning speed (turbine with flat blades).11.-Measurement of performance at constant speeds.12.-Static pressure increasing.13.-Sensors calibration.Other possible practices (with the optional Set of Accessories):14.-Calculation of flow. Test with discharge duct and nozzle.15.-Calculation of flow. Test with aspiration duct and nozzle.16.-Calculation of the differential flow according to the turbines position in the discharge duct.17.-Calculation of the differential flow according to the turbines position in the aspiration duct.18.-Determination of the fan characteristics curves (with the optional Set of Accessories).19.-Measuring a cooling curve.20.-Determination of the coefficient of heat transfer from the cooling curve.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Computer Controlled Centrifugal Fan Teaching Trainer is listed in the Fluid Mechanics category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Computer Controlled Centrifugal Fan Teaching Trainer.

Related products

  • Placeholder
    Fluid Mechanics

    Demonstration Pelton Turbine

    A characteristic of impulse turbines is the complete conversion of pressure into kinetic energy at the exit of the supply nozzle. The turbine consists of a housing, which is transparent on one side, the Pelton bucket wheel and an adjustable supply nozzle. The turbine is loaded with a belt brake. The torque is measured using spring balances located on the braking belt. The manometer fitted to the unit measures the water pressure applied. The pressurised water supply and flow rate measurement is provided . Alternatively, the arrangement can also be operated from the laboratory mains supply.

  • Placeholder
    Fluid Mechanics

    Thermal Engineering Equipments

    The demonstrator is designed such that it can be set up with an inlet tank and an outlet tank .The inlet and outlet tanks guarantee constant-pressure conditions. A flow channel of variable cross-section and transparent viewing window forms the main component of the experimental set-up. By means of the addition of ink, the velocity along the channel can be demonstrated. A twelve-tube manometer for measuring static pressure is distributed along the length of the nozzle at even distances to indicate the pressure distribution.

  • Placeholder
    Fluid Mechanics

    Principles of Hydraulics

    The is part of a series of units that enable experiments to be performed on flow processes with the aid of a computer. Here several areas of incompressible flows can be investigated. After the recording of a pump characteristic curve, experiments on the topics of pipe flow and flow in open flumes can be performed. Water flows through a Venturi tube, an orifice, a bend, or a kink. During this process the pressure loss is measured and compared with the flow through a straight pipe. On flumes experiments can be performed on the open channel and on a channel with weir structures. Two different weir structures are supplied . The Data Logging Unit is necessary for the operation of the Computer Linked Hydraulics Bench. If power data is to be displayed, the Digital Power Meter is required.

  • Placeholder
    Fluid Mechanics

    Pitot-Static Tube Apparatus

    It is possible to move the Pitot-static tube across the entire cross-section of the pipe and thus measure the pressure profile. The position of the measuring tip relative to the bottom of the pipe can be read on a scale. The Pitot-static tube can be connected to any differential pressure manometer using hose connections. Differential pressures up to approx. 50mbar are possible when using the pump .The water supply is provided either from the laboratory mains or using the (closed water circuit).

Scroll to Top