Related products

• 
  Chemical Reaction Engineering

  Plug Flow Tubular Reactor Coiled Tube Type

  The set up consists of two feed tanks through which two reactants are fed to the reactor. It is a helical coil tube type reactor. Rotameters are provided to measure the individual flow of Chemicals. The flow rate can be adjusted by operating the needle valves provided on respective Rotameter. The compressed air is used for circulation of feed. Samples are collected for analysis from the outlet of reactor. Pressure Regulator, Pressure Gauge and Safety Valve are fitted in the compressed air line. In an ideal Plug Flow Reactor (PFTR) there is no mixing in the direction of flow and complete mixing perpendicular to direction of flow. Concentration of reactants varies along the length of reactor but not in radial direction. This set-up is used to study a non-catalytic homogeneous reaction under ambient condition.

• 
  Chemical Reaction Engineering

  Computer Controlled Cascade Continuously Stirred Tank Reactor

  In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under ambient condition. The setup consists of three CSTR arranged in series and two feed tanks through which two reactants are fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. Reactants from feed tanks enter in the first CSTR and are passed to second CSTR and so on.To study the performance of Cascade of three equal volumes CSTR’s in series for the saponification of a reaction.

• 
  Chemical Reaction Engineering

  Isothermal Batch Reactor

  A batch reactor is a closed system with no input and output streams. A batch reactor can operate under conditions like Isothermal (Temperature of Reaction Mass remains constant), perfectly mixed (composition of reaction mixture is uniform throughout), and constant volume (volume of the reaction mixture within the reactor remains constant, there is no appreciable change in the density of reaction mass). This setup is used to study a non-catalytic homogeneous reaction under isothermal condition.The set up consists of a Reactor fitted in a constant temperature water bath. One stirrer is fitted for mixing the reactants in reactor and other is fitted in water bath to keep the uniform temperature throughout in the bath. The temperature of bath can be maintained from ambient to 90 DegreeC with the help of Digital Temperature indicator Cum Controller.

• 
  Chemical Reaction Engineering

  Computer Controlled Isothermal Continuously Stirred Tank Reactor

  In an ideal CSTR (i.e. an ideal steady state flow reactor) the contents in reactor are well mixed and have uniform composition throughout. Thus the exit stream has the same composition as the fluid within the reactor. This type of reactor is known as mixed flow reactor. This set-up is used to study a non-catalytic homogeneous second order liquid phase reaction under isothermal condition. The set up consists of two feed tanks through which two reactants are fed to the reactor. The flow rate can be varied by changing the speed of peristaltic pump. The CSTR is fitted with stirrer for proper mixing. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures.