Related products

• 
  Soil Test Instruments

  Consolidation Apparatus (Single Gang)

  Consolidation test is un-dimentional test considered extremely important in soil mechanics. Sample taken from adjacent areas of a single site show differential settlement even when tested using same techniques. Soil of similar strength may show varying consolidation. Samples are very carefully prepared and vertical settlement of the specimen in saturated or drained conditions carefully recorded when known load is applied.Specification:The standard outfit comprises of the following items. Loading unit, maximum capacity 20kg/cm.sq. Having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. The loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. Fixed ring type Consolidometer (Odeometer) cell assembly for testing 60mm dia x 20mm thick specimen comprising:Fixed ring type Consolidometer (Odeometer) cell assembly for testing 60mm dia x 20mm thick specimen comprising: Fixed ring for specimens 60mm dia x 20mm thick with guide ring. Top and bottom porous stones for 60mm dia specimen. Perforated pressure pad, Channeled base with water inlet and gasket Flanged water jacket, water reservoir with plastic tube and pinch cock. Set of weights to give a pressure of 10kg/cm.sq. On 60mm dia specimen, comprising : 7 nos. 0.05 kg/cm .sq., 5nos. 0.1 kg/sq.cm., 6nos. 0.5kg/sq. cm., and 5 nos. 1.0 kg/sq.cm. Supplied complete as above but without dial gauge.

• 
  Soil Test Instruments

  Static Cone Penetrometer Capacity

  For reaching greater depths and to facilitate easy and constant rate of penetration 1 to 2.5cm/sec of the cone this engine-driven Static Cone Penetrometer of 100 KN (10,000 Kgf) capacity is preferable. The equipment consists of a hydraulic pump driven by a Diesel Engine. The whole system is mounted on a tow able trolley fitted with pneumatic wheels. The pumping unit and ram are connected by means of flexible pipes through a direction control valve. The hydraulic ram moves on a two pillar stand mounted on a trolley 1.Penetration Cone, steel 60 cone angle, 10cm2 base area, with friction jacket One 2. Mantle Tube, 36mm uniform OD with sounding Rod working length 1 m Thirty 3. Load Measuring Head, with Automatic cut-off valve, and oil can without pressure gauges. 4. Pressure Gauge, 0-600 x 5 kg/cm One 5. Pressure Gauge, 0 100 x 1kg/cm One 6. Trusses Two 7. Screw Anchor 45 cm Six 8. Screw Anchor 30 cm Six 9. Screw Anchor 20 cm Six 10. Screw Anchor Rod with cone Six 11. Driving handle for Screw Anchor One 12. Extension Pipe for Handle Four 13. Clamping Screw with Nuts Six 14. Extractor Tube with Connector One 15. Tool Box One 16. Tarpaulin Cover One.

• 
  Soil Test Instruments

  Unconfined Compression Tester Proving Ring Type

  This is a hand operated instrument for determining the unconfined compression strength of soil specimens of diameter ranging from 38mm to 100mm. Load on the sample is applied gradually by a hand operated load frame and loads are measured on a sensitive proving ring attached to the load frame.

• 
  Soil Test Instruments

  Proctor Needles (Hydraulic Type)

  Comprises hydraulic proctor needle system complete with a pressure gauge fixed at easily readable angle reading 0-70 kg x 2 kg
  A set of needle points consisting one each 0.25, 0.5, 1.0, 1.5, 2.0, 3.5 and 6.0 sq. cm.
  a wooden carrying case.