6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Continuous Rectification

Distillation is used to separate liquid mixtures made up of individual liquids that are soluble in one another. Rectification refers to distillation in a countercurrent. Ethanol/water is recommended as the liquid mixture for the Distillation is used to separate liquid mixtures made up of individual liquids that are soluble in one another. Rectification refers to distillation in a countercurrent. Ethanol/water is recommended as the liquid mixture for the Distillation is used to separate liquid mixtures made up of individual liquids that are soluble in one another. Rectification refers to distillation in a countercurrent. Ethanol/water is recommended as the liquid mixture for the Continuous Rectification. It is fed into the column. It partially evaporates on its way to the bottom of the column where it is heated to boiling. The mixed vapour produced then moves upwards in the column. The mixed vapour contains a higher concentration of the component with the lower boiling point (ethanol). It leaves the top of the column and is condensed using a condenser and a phase separation tank. Part of this condensate is collected in a tank as product while the rest is fed back into the column. Here, on its way downwards, it undergoes further heating and material exchange with the rising mixed vapour. This exchange causes the vapour phase to become richer in ethanol and the liquid phase to become richer in water. The liquid phase moves to the bottom and can be collected in two tanks. A heat exchanger allows the feed to be preheated by the bottom product carried away from the column. A sieve tray column and a packed column are available. The sieve tray column has three connections at different heights for the feed. The packed column is filled with Raschig rings. The reflux ratio is adjusted using actuating valves. Relevant experimental parameters are recorded by sensors and displayed digitally and processed onto a PC. The software also allows adjustment of the evaporator and the reflux ratio using PID controllers.. It is fed into the column. It partially evaporates on its way to the bottom of the column where it is heated to boiling. The mixed vapour produced then moves upwards in the column. The mixed vapour contains a higher concentration of the component with the lower boiling point (ethanol). It leaves the top of the column and is condensed using a condenser and a phase separation tank. Part of this condensate is collected in a tank as product while the rest is fed back into the column. Here, on its way downwards, it undergoes further heating and material exchange with the rising mixed vapour. This exchange causes the vapour phase to become richer in ethanol and the liquid phase to become richer in water. The liquid phase moves to the bottom and can be collected in two tanks. A heat exchanger allows the feed to be preheated by the bottom product carried away from the column. A sieve tray column and a packed column are available. The sieve tray column has three connections at different heights for the feed. The packed column is filled with Raschig rings. The reflux ratio is adjusted using actuating valves. Relevant experimental parameters are recorded by sensors and displayed digitally and processed onto a PC. The software also allows adjustment of the evaporator and the reflux ratio using PID controllers.. It is fed into the column. It partially evaporates on its way to the bottom of the column where it is heated to boiling. The mixed vapour produced then moves upwards in the column. The mixed vapour contains a higher concentration of the component with the lower boiling point (ethanol).

SKU: 69b726238f3f Category:
Request a Quote

Continuous Rectification

Interlabs presents Continuous Rectification, listed under our Process Control Eengineering range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

Distillation is used to separate liquid mixtures made up of individual liquids that are soluble in one another. Rectification refers to distillation in a countercurrent. Ethanol/water is recommended as the liquid mixture for the Distillation is used to separate liquid mixtures made up of individual liquids that are soluble in one another. Rectification refers to distillation in a countercurrent. Ethanol/water is recommended as the liquid mixture for the Distillation is used to separate liquid mixtures made up of individual liquids that are soluble in one another. Rectification refers to distillation in a countercurrent. Ethanol/water is recommended as the liquid mixture for the Continuous Rectification. It is fed into the column. It partially evaporates on its way to the bottom of the column where it is heated to boiling. The mixed vapour produced then moves upwards in the column. The mixed vapour contains a higher concentration of the component with the lower boiling point (ethanol). It leaves the top of the column and is condensed using a condenser and a phase separation tank. Part of this condensate is collected in a tank as product while the rest is fed back into the column. Here, on its way downwards, it undergoes further heating and material exchange with the rising mixed vapour. This exchange causes the vapour phase to become richer in ethanol and the liquid phase to become richer in water. The liquid phase moves to the bottom and can be collected in two tanks. A heat exchanger allows the feed to be preheated by the bottom product carried away from the column. A sieve tray column and a packed column are available. The sieve tray column has three connections at different heights for the feed. The packed column is filled with Raschig rings. The reflux ratio is adjusted using actuating valves. Relevant experimental parameters are recorded by sensors and displayed digitally and processed onto a PC. The software also allows adjustment of the evaporator and the reflux ratio using PID controllers.. It is fed into the column. It partially evaporates on its way to the bottom of the column where it is heated to boiling. The mixed vapour produced then moves upwards in the column. The mixed vapour contains a higher concentration of the component with the lower boiling point (ethanol). It leaves the top of the column and is condensed using a condenser and a phase separation tank. Part of this condensate is collected in a tank as product while the rest is fed back into the column. Here, on its way downwards, it undergoes further heating and material exchange with the rising mixed vapour. This exchange causes the vapour phase to become richer in ethanol and the liquid phase to become richer in water. The liquid phase moves to the bottom and can be collected in two tanks. A heat exchanger allows the feed to be preheated by the bottom product carried away from the column. A sieve tray column and a packed column are available. The sieve tray column has three connections at different heights for the feed. The packed column is filled with Raschig rings. The reflux ratio is adjusted using actuating valves. Relevant experimental parameters are recorded by sensors and displayed digitally and processed onto a PC. The software also allows adjustment of the evaporator and the reflux ratio using PID controllers.. It is fed into the column. It partially evaporates on its way to the bottom of the column where it is heated to boiling. The mixed vapour produced then moves upwards in the column. The mixed vapour contains a higher concentration of the component with the lower boiling point (ethanol).

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Continuous Rectification is listed in the Process Control Eengineering category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Process Control Eengineering.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Continuous Rectification.

Related products

  • Placeholder
    Process Control Eengineering

    Level Control Demonstration Unit

    This training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of level control. All components are clearly laid out on a vertical panel. The large-format process diagram provides an aid to understanding. A pump transfers water from a storage tank into the transparent process tank. The level is measured by an electronic pressure transducer installed at the base of the process tank. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is an electromagnetic proportional valve. A ball valve in the outlet enables defined disturbance variables to be generated. The controlled variable X and the manipulating variable Y can be tapped as analogue signals at lab jacks. This enables external recording equipment, such as a plotter or an oscilloscope, to be connected. An instrumentation and control software with interface module (USB) is available as an accessory. This enables the key process variables to be represented, and control functions executed. The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.

  • Placeholder
    Process Control Eengineering

    Pressure Control Trainer

    This teaching and training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of pressure control. The air pressure control system is a 2nd order system. It comprises two in-line pressure vessels interconnected by a restrictor valve. An additional valve on the second tank makes air tapping possible and so can be used to simulate a disturbance variable. A pressure transducer mesaures the pressure in the second vessel. The controller used is a state-of-the-art digital industrial controller. The actuator in the loop is a pneumatically operated control valve with a standardised current signal input. The controlled variable X and the manipulating variable Y are plotted directly on an integrated 2-channel line recorder. Alternatively, the variables can be tapped as analogue signals at lab jacks on the switch cabinet. This enables external recording equipment, such as an oscilloscope or a flatbed plotter, to be connected.

  • Placeholder
    Process Control Eengineering

    Training System Speed Control

    This compact teaching / training unit offers every opportunity to learn the fundamentals of process control through experimentation on a speed control system. The experimentation set-up is mounted on a solid housing which accommodates all the electronics. A transparent protective cover permits safe observation of the experiments. A DC motor drives a shaft with a mass flywheel. The dial gauge allows the speed to be read off directly at any time. The speed is measured inductively using a speed transducer. The output signal from the transducer is sent to the software controller. The output signal from the controller influences the motor current. A generator acting as a mechanical resistance to shaft rotation can be activated by the software to study the influence of disturbance variables. The powerful state-of-the-art software is an integral part of the training system, embodying the principle of hardware/software integration (HSI). It enables the experiments to be conducted and evaluated in a user-friendly manner. The software has network capability. The link between the practice system and the PC is made via a USB port. Clearly structured and comprehensive instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

  • Placeholder
    Process Control Eengineering

    Pressure Control Demonstration Unit

    This training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of pressure control. All components are clearly laid out on a vertical front panel. The large-format process diagram provides an aid to understanding. The controlled system is operated by compressed air, which must be provided by the laboratory. The use of two in-line pressure vessels permits a 2nd order control system to be constructed. Disturbances can be generated by alternate air tapping by way of a hand-operated valve. Both pressure vessels are fitted with manometers. An electronic pressure transducer measures the pressure. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is an electro-pneumatic control valve. The controlled variable X and the manipulating variable Y can be tapped as analogue signals at lab jacks. This enables external recording equipment, such as a plotter or an oscilloscope, to be connected.
    An instrumentation and control software with interface module (USB) is available as an accessory. This enables the key process variables to be represented, and control functions executed. The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.

Scroll to Top