6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Experimental Module Block on Ring Friction

Using this instructional unit, investigations are performed on wear. The unit is intended for operation with the basic module . A dog coupling transmits the force from the drive unit. For the experiments, pins made of various materials rub against the external surface of a rotating disc under varying lubrication conditions. Initially a point contact is formed, as the wear increases, this changes to a surface contact. The friction wheel is made of hardened stainless steel, the surface is ground. There is a container for lubricant underneath the friction wheel. The pins are loaded using a lever with weights. The friction forces are measured with the aid of a full bridge strain gauge on the lever joint.

SKU: e7cd8103827b Category:
Request a Quote

Experimental Module Block on Ring Friction

Interlabs presents Experimental Module Block on Ring Friction, listed under our Engineering Mechanics and machi range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

Using this instructional unit, investigations are performed on wear. The unit is intended for operation with the basic module . A dog coupling transmits the force from the drive unit. For the experiments, pins made of various materials rub against the external surface of a rotating disc under varying lubrication conditions. Initially a point contact is formed, as the wear increases, this changes to a surface contact. The friction wheel is made of hardened stainless steel, the surface is ground. There is a container for lubricant underneath the friction wheel. The pins are loaded using a lever with weights. The friction forces are measured with the aid of a full bridge strain gauge on the lever joint.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Experimental Module Block on Ring Friction is listed in the Engineering Mechanics and machi category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Engineering Mechanics and machi.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Experimental Module Block on Ring Friction.

Related products

  • Placeholder
    Engineering Mechanics and machi

    Experimental Set Deflection Of Trusses

    This experimental set enables, in conjunction with the universal test frame , the elastic deformation of different plane trusses to be experimentally investigated. During these experiments, Castigliano’s theory is demonstrated and applied. The truss members are made of PVC. The different lengths of the members enable numerous truss variants to be assembled and save time-consuming adjustment. The members are quickly and securely attached to the joint disc using special snap action joints. A spindle drive with a ring dynamometer is used to load the truss. The two bearings with joint discs and the loading device are equipped with rapid action fasteners for attachment to the frame.

  • Placeholder
    Engineering Mechanics and machi

    Universal Testing Frame 400kN

    This testing frame is primarily used for loading experiments on components from steelwork and civil engineering. It is specially designed for large components in 1:1 scale. The design with its double frame and intermediate space permits specimens longer than the size of the frame opening to be investigated. It this way the possible uses of the testing frame are almost unlimited. The frame components are manufactured from U section St52. The corners of the frame are formed by joints rigid to bending, each is fastened together with 9 high-strength bolts. The testing frame is delivered in pre-assembled modules; it is assembled on site and placed on four adjustable, vibration damping bearings. The hydraulic ram systems available as accessories are on rollers and can be positioned as required within the frame.

  • Placeholder
    Engineering Mechanics and machi

    Forces in Various Single Plane Trusses

    This set enables the distribution of the forces in various plane trusses to be investigated using the universal test frame . A useful range of member lengths saves time-consuming adjustment. The members can be quickly and sturdily connected to joint discs using special snap action connectors. For the measurement of the force, all members are equipped with strain gauge bridges. The measuring amplifier is required to display the forces in the members and to further process the measured values on a PC. A set of cables to connect strain gauges and the amplifier is included. The trusses can be loaded using a spindle drive with a ring dynamometer and strain gauge.

  • Placeholder
    Engineering Mechanics and machi

    Strain Gauge Kit

    The handy carrying case provides all the necessary tools, adhesives and miscellaneous aids for fitting strain gauges to components, and for connecting up the strain gauges. Specifically, the set contains: 10 strain gauges, 10 parallel strain gauge measuring grids, 10 90° strain gauge measuring grids, 2 tweezers (pointed and flat), 2 pairs of scissors (serrated and pointed), 1 scalpel with 6 blades, 1 dental instrument, 1 cement spatula, 1 petri dish, 2 rulers, 1 folding pocket magnifier, 3 brushes, solvent, abrasive cloths, 200 fabric pads, adhesive strips, 1 soldering iron, solder, flux, ribbon cable, 1 cutter and stripper, pencil, eraser

Scroll to Top