6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Flow Around a Bend

The accessory is intended for use with the test stand. A transparent pipe bend with a constant square cross-section is attached to the test stand using quick action fasteners. The pipe bend is equipped with measuring glands at regular intervals for measuring the pressure loss. The measuring gland are connected to the Multi Tube Manometer.

SKU: 28a1c62bc578 Category:
Request a Quote

Flow Around a Bend

Interlabs presents Flow Around a Bend, listed under our Fluid Mechanics Fundamentals range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

The accessory is intended for use with the test stand. A transparent pipe bend with a constant square cross-section is attached to the test stand using quick action fasteners. The pipe bend is equipped with measuring glands at regular intervals for measuring the pressure loss. The measuring gland are connected to the Multi Tube Manometer.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Flow Around a Bend is listed in the Fluid Mechanics Fundamentals category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics Fundamentals.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Flow Around a Bend.

Related products

  • Placeholder
    Fluid Mechanics Fundamentals

    Jet Attachment Apparatus

    The accessory, in combination with the Air Flow Bench, is suitable for investigations on a pneumatic logic component. The experimental set-up has a transparent front panel that, together with a rear wall, forms a gap that is bounded by swivelling, sliding side walls. A sliding wedge fitted between the guides separates the outlet zone. Scales allow the sliding elements to be precisely adjusted. The logic component is fitted to the test stand using quick action fasteners.

  • Placeholder
    Fluid Mechanics Fundamentals

    Supersonic Wind Tunnel

    Continuously operating supersonic wind tunnel with a rectangular measuring section. Transsonic and supersonic flows from Ma 0.8 up to Ma 1.8 can be realized with interchangeable measuring sections and nozzle profiles. Supersonic flow and the occurring shock waves can be directly observed with the supplied Schlieren optic apparatus. The continuous operation allows enough time to take measurements and to observe the phenomena. Four aerofoil models are supplied: a wedge, a double wedge, a bullet and a rocket. A flow straightener at the inlet ensures a low degree of turbulence.

  • Placeholder
    Fluid Mechanics Fundamentals

    Heat Transfer Lab Equipment

    The Heat Transfer Model, designed as an accessory for the , is used for the experimental investigation of heat transfer from a heated rod to an air flow. It comprises a rod oven and a copper specimen. The copper rod is heated in the oven to approx. 110 DegreeC, before it is placed in the Computer Linked Air Flow Bench. A temperature sensor is built into the specimen; this is connected to the oven and from there transmits its measured data to the Data Logging Unit. By measuring the cooling curve in a flow of air, the coefficient of heat transfer can be determined.

  • Placeholder
    Fluid Mechanics Fundamentals

    Air Conditioning Lab Equipment

    TheSplit Air Conditioner Test Rigunit is required to conduct experiments and demonstrate the process of cooling of atmospheric air. The unit will be fitted with all instruments facilities so that temperature, pressure etc. may be measured at different points in the air conditioning system.Learning Objectives/ExperimentsTo study the Vapour Compression air conditioning cycle.To Calculate Co-efficient of performance-(COP) by the use of P-H diagram.

Scroll to Top