6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Modular Flow Channel / 300 x 450 mm

The modular flow channel 5m working section is a basic unit with a modular construction, which allows the study of flow behavior in a large number of experiments. The extensive accessories give researchers and instructors the opportunity to carry out experiments from all areas of hydromechanics. The measurement section of the basic unit is 5m long. It can be extended by adding 2.5m intermediate sections to reach a maximum length of 15m. Important components of the basic unit are the specially designed inlet area which creates a homogeneous flow, a centrifugal pump for creating the water circuit, regulating flaps for adjusting the throughput quantity, a magnetic-inductive flow meter and a hand-operated slope adjustment which is used to compensate flow losses or to simulate a natural slope. Because the unit can be set up anywhere, its adaptability to specific local conditions is guaranteed. Once the flow channel has been filled it can be operated independent of the water network. The modular construction permits quick and easy assembly at the desired set-up location. The side panels are made of hardened glass to permit a virtually unobstructed view. The measurement section is provided with a guide rail for installing a measuring cart. The inlet, outlet and tanks are made of lightweight GRP to ensure a high degree of stability and a long service life. The separation of channel and support structure ensures the precise alignment of the operating area. The wide selection of accessories greatly enhances the usefulness of the basic unit.

SKU: b6f06de81208 Category:
Request a Quote

Modular Flow Channel / 300 x 450 mm

Interlabs presents Modular Flow Channel / 300 x 450 mm, listed under our Fluid Mechanics Hydrology Engin range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

The modular flow channel 5m working section is a basic unit with a modular construction, which allows the study of flow behavior in a large number of experiments. The extensive accessories give researchers and instructors the opportunity to carry out experiments from all areas of hydromechanics. The measurement section of the basic unit is 5m long. It can be extended by adding 2.5m intermediate sections to reach a maximum length of 15m. Important components of the basic unit are the specially designed inlet area which creates a homogeneous flow, a centrifugal pump for creating the water circuit, regulating flaps for adjusting the throughput quantity, a magnetic-inductive flow meter and a hand-operated slope adjustment which is used to compensate flow losses or to simulate a natural slope. Because the unit can be set up anywhere, its adaptability to specific local conditions is guaranteed. Once the flow channel has been filled it can be operated independent of the water network. The modular construction permits quick and easy assembly at the desired set-up location. The side panels are made of hardened glass to permit a virtually unobstructed view. The measurement section is provided with a guide rail for installing a measuring cart. The inlet, outlet and tanks are made of lightweight GRP to ensure a high degree of stability and a long service life. The separation of channel and support structure ensures the precise alignment of the operating area. The wide selection of accessories greatly enhances the usefulness of the basic unit.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Modular Flow Channel / 300 x 450 mm is listed in the Fluid Mechanics Hydrology Engin category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics Hydrology Engin.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Modular Flow Channel / 300 x 450 mm.

Related products

  • Ground Water Flow
    Fluid Mechanics Hydrology Engin

    Ground Water Flow

    This unit for the investigation of ground water flows and drainage processes is fitted to a trolley. It consists primarily of a plastic tank that is filled with fine gravel for the experiments. Inlet and outlet pipes facilitate the production of a flow of water through the layer of gravel. Measuring connections are fitted to the base of the tank, these are connected to tube manometers using hoses so that the water levels can be displayed on a measuring station. Inserts supplied with the unit facilitate the simulation of excavations and wells. The gravel filling is not included.

  • Rainfall Hydrograph
    Fluid Mechanics Hydrology Engin

    Rainfall Hydrograph

    The is used to demonstrate the hydrological phenomena of rainfall. It shows the relationships between rainfall and the seepage of rainwater. A stainless steel tank filled with gravel acts as the ground. The water can be drained from the ground using a drainage tube or a filter. A time-controlled motorised water drain distributes the leakage water to 17 transparent measuring tanks. This allows a chronological profile of the discharge of water from the ground to be identified. The ground sample is irrigated by 2 nozzles that can be separately selected using ball valves. A solenoid valve releases the rain. The quantity of rain is adjusted using a control valve and a flow meter. 3 electronic time switches control the irrigation time, the delay time and the measuring time. The unit includes an extra cleaning connection for cleaning the tubes. A tarpaulin is supplied for experiments including a non-permeable layer. Plastic containers that can be inserted in the tank act as rain storage reservoirs.

  • Sediment Transport Channel
    Fluid Mechanics Hydrology Engin

    Sediment Transport Channel

    The Sediment Transport Flow Channel facilitates the comprehensive investigation of sediment motion. In addition to the channel, 2 different weir bodies as well as a bridge pile are included so that the behaviour of the sediment at these typical hydraulic engineering structures can also be investigated. The flow rate in the channel is determined using a measuring weir that closes the rear of the working section. From there the water flows into the tank before it is pumped back into the channel by the pump. In the inlet section of the channel there is an additional device for filtering out the sediment. A filling of sediment is not included.

  • Flume For Open And Closed Flow
    Fluid Mechanics Hydrology Engin

    Flume For Open And Closed Flow

    The enables experiments to be performed on open and closed flumes. In the open flume the flow processes at various weir structures can be investigated. By means of straightforward reconfiguration, it is possible to create a closed flume. In this way basic experiments on pipe flow or on flow processes in a culvert can also be made on the unit. The integrated, height adjustable ramp can be used for both flumes: in the open channel it is used as a further underwater weir, while in the closed flume it causes a change in the flow cross-section and thus facilitates the investigation of different flow conditions. In this way a large range of experiments can be performed with a unit of straightforward design.

Scroll to Top