6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Rising Film Evaporation

Evaporators are used in process engineering and food technology for increasing the concentration of solutions. Part of the solvent is removed by evaporation, which means that the solution retains a higher concentration of dissolved solids. Film evaporators are used in particular for temperature-sensitive solutions such as milk.The CE 715 allows the operating behaviour of a rising film evaporator to be investigated. The untreated solution is fed from the feed tank below into the evaporator. The evaporator is a double pipe heat exchanger that is heated by steam. The steam pressure on the casing side is adjusted with a PID controller. A cyclone is installed after the evaporator to separate the evaporated solvent and the concentrated solution. The solvent vapour removed is condensed in a water-cooled condenser and collected in a tank. The concentrated solution can also be collected in a tank or fed back into the evaporator for the concentration to be increased further. The two tanks, the cyclone and the condenser are made of glass for better observation. The system can also be operated under a vacuum to reduce the boiling point of the solvent. The evaporation pressure, heating steam pressure, relevant temperatures and flow rates are recorded to allow evaluation and monitoring of the process. To clean the system while installed, a pump and cleaning nozzles are fitted in the condensate and concentrate tanks. Common salt and water are the recommended cleaning materials. allows the operating behaviour of a rising film evaporator to be investigated. The untreated solution is fed from the feed tank below into the evaporator. The evaporator is a double pipe heat exchanger that is heated by steam. The steam pressure on the casing side is adjusted with a PID controller. A cyclone is installed after the evaporator to separate the evaporated solvent and the concentrated solution. The solvent vapour removed is condensed in a water-cooled condenser and collected in a tank. The concentrated solution can also be collected in a tank or fed back into the evaporator for the concentration to be increased further. The two tanks, the cyclone and the condenser are made of glass for better observation. The system can also be operated under a vacuum to reduce the boiling point of the solvent. The evaporation pressure, heating steam pressure, relevant temperatures and flow rates are recorded to allow evaluation and monitoring of the process.To clean the system while installed, a pump and cleaning nozzles are fitted in the condensate and concentrate tanks.

SKU: 49e2aaa8a51b Category:
Request a Quote

Rising Film Evaporation

Interlabs presents Rising Film Evaporation, listed under our Process Control Eengineering range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

Evaporators are used in process engineering and food technology for increasing the concentration of solutions. Part of the solvent is removed by evaporation, which means that the solution retains a higher concentration of dissolved solids. Film evaporators are used in particular for temperature-sensitive solutions such as milk.The CE 715 allows the operating behaviour of a rising film evaporator to be investigated. The untreated solution is fed from the feed tank below into the evaporator. The evaporator is a double pipe heat exchanger that is heated by steam. The steam pressure on the casing side is adjusted with a PID controller. A cyclone is installed after the evaporator to separate the evaporated solvent and the concentrated solution. The solvent vapour removed is condensed in a water-cooled condenser and collected in a tank. The concentrated solution can also be collected in a tank or fed back into the evaporator for the concentration to be increased further. The two tanks, the cyclone and the condenser are made of glass for better observation. The system can also be operated under a vacuum to reduce the boiling point of the solvent. The evaporation pressure, heating steam pressure, relevant temperatures and flow rates are recorded to allow evaluation and monitoring of the process. To clean the system while installed, a pump and cleaning nozzles are fitted in the condensate and concentrate tanks. Common salt and water are the recommended cleaning materials. allows the operating behaviour of a rising film evaporator to be investigated. The untreated solution is fed from the feed tank below into the evaporator. The evaporator is a double pipe heat exchanger that is heated by steam. The steam pressure on the casing side is adjusted with a PID controller. A cyclone is installed after the evaporator to separate the evaporated solvent and the concentrated solution. The solvent vapour removed is condensed in a water-cooled condenser and collected in a tank. The concentrated solution can also be collected in a tank or fed back into the evaporator for the concentration to be increased further. The two tanks, the cyclone and the condenser are made of glass for better observation. The system can also be operated under a vacuum to reduce the boiling point of the solvent. The evaporation pressure, heating steam pressure, relevant temperatures and flow rates are recorded to allow evaluation and monitoring of the process.To clean the system while installed, a pump and cleaning nozzles are fitted in the condensate and concentrate tanks.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Rising Film Evaporation is listed in the Process Control Eengineering category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Process Control Eengineering.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Rising Film Evaporation.

Related products

  • Placeholder
    Process Control Eengineering

    Temperature Control Apparatus with Experimental Panels

    This instructional system is used to examine a simple temperature control unit. It consists of clearly arranged modular experimental panels which are suspended in a frame and connected with cables. A soldering iron equipped with a thermal element is used as the temperature control system. The temperature can be read on a digital display with a measuring transducer. The system includes a digital industrial controller which can be configured continuously as P, PD, PI and PID controller. It is possible to also use it as a two-point controller. The manipulated value can be indicated on a bar diagram. An electronic power control completes the system. The student has the opportunity to get familiar with the components of a control circuit, to interconnect them and vary their parameters. All components are of a sturdy design and therefore well suited for student experiments.

  • Placeholder
    Process Control Eengineering

    Pressure Control Demonstration Unit

    This training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of pressure control. All components are clearly laid out on a vertical front panel. The large-format process diagram provides an aid to understanding. The controlled system is operated by compressed air, which must be provided by the laboratory. The use of two in-line pressure vessels permits a 2nd order control system to be constructed. Disturbances can be generated by alternate air tapping by way of a hand-operated valve. Both pressure vessels are fitted with manometers. An electronic pressure transducer measures the pressure. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is an electro-pneumatic control valve. The controlled variable X and the manipulating variable Y can be tapped as analogue signals at lab jacks. This enables external recording equipment, such as a plotter or an oscilloscope, to be connected.
    An instrumentation and control software with interface module (USB) is available as an accessory. This enables the key process variables to be represented, and control functions executed. The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.

  • Placeholder
    Process Control Eengineering

    Multi-Process Control Trainer

    This control trainer is a comprehensive unit featuring only industrial components. It contains a transparent tank for liquid-level and pressure control, a corresponding pipe for flow control, and a two-circuit system with a plate heat exchanger for temperature control. Alternatively, a pneumatically operated control valve or a speed-controlled pump are used as actuator. The parameters of the digital controller can be adjusted over wide ranges so that a large number of different process conditions can be investigated. Electronic sensors measure the individual process values. A three-channel recorder with current inputs is included for recording the control behavior over time. Software for the process visualization and Profibus card are available as an accessory.

  • Placeholder
    Process Control Eengineering

    Test Stand for Level Pressure Control

    This high quality test stand enables to perform complex experiments on a multivariable system often used in practice. In this particular case, a vacuum degassing model is used as an example of an interacting two-variable control system. Vacuum and level are the two variables to be controlled in a process tank. Pressure and level are interdependent variables. The system has a closed water circuit. The vacuum is generated by a waterjet pump with its own water circuit. Two pneumatic control valves control vacuum generation and discharge from the tank. The test stand contains high quality instrumentation. The controllers have a Profibus DP interface. This interface allows the test stand to be monitored by optional process control software . This software can also be used to record process variables and to tune controller parameters via PC.

Scroll to Top