6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Sensor Supply Module

The sensor supply module is used to provide power to vibrations sensors. The module provides the necessary power and outputs the corresponding measured signals. Up to four sensors can be connected simultaneously using 7-pole DIN sockets. The analogue measured signals in the range from 1 to 9 Volts are output on 4mm laboratory sockets and can be displayed on a meter or an oscilloscope. The benchtop unit has a robust steel sheet housing with anti-slip rubber feet.

SKU: 90a03a4a6f9b Category:
Request a Quote

Sensor Supply Module

Interlabs presents Sensor Supply Module, listed under our Engineering Mechanics and machi range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

The sensor supply module is used to provide power to vibrations sensors. The module provides the necessary power and outputs the corresponding measured signals. Up to four sensors can be connected simultaneously using 7-pole DIN sockets. The analogue measured signals in the range from 1 to 9 Volts are output on 4mm laboratory sockets and can be displayed on a meter or an oscilloscope. The benchtop unit has a robust steel sheet housing with anti-slip rubber feet.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Sensor Supply Module is listed in the Engineering Mechanics and machi category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Engineering Mechanics and machi.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Sensor Supply Module.

Related products

  • Placeholder
    Engineering Mechanics and machi

    Winch

    Allows to study a winch concerning its lifting velocity and its load transmission. Additionally, the functioning of a back-run safety device is demonstrated. Load transmission and efficiency can be determined by force equilibrium. Both rope drums are ball-bearing mounted. The forces are generated by sets of weights and can be quickly and easily varied.

  • Placeholder
    Engineering Mechanics and machi

    Structures Table with Standard Roof Truss

    This training unit is used to investigate loaded plane trusses and enables the member forces to be measured. A pre-assembled main truss is included. The trusses are assembled using joint discs to avoid bending loading. Seven of the members are equipped with full bridge strain gauges for the measurement of force. A strain gauge connecting box is included in which the offset error of the individual strain gauges is already compensated. The measuring amplifier FL 151 is required for measured signal conditioning. The loading device is mounted in bearings such that it can rotate, as a result it is also possible to apply forces at an angle. The unit is designed as an easy to operate table model. Another truss is available as an accessory, a laboratory trolley for storing the individual parts is also available.

  • Placeholder
    Engineering Mechanics and machi

    Shearing Force and Bending Moment Apparatus

    This demonstration unit facilitates the experimental investigation of the progression of the bending moment and shearing forces on a bar subject to point loads. In addition, the section principle commonly used in mechanics can be demonstrated. Due to the use of a low friction joint with two degrees of freedom at 1/3 of the span and two dynamometers, the measurements can be recorded directly from the bar. The deflection of the bar as result of the travel of the dynamometers and the horizontal alignment can be compensated and regulated using two adjustment bolts. The bar is loaded with graduated sets of weights that can be attached at any point on the bar.

  • Placeholder
    Engineering Mechanics and machi

    Experimental Set Redundant Truss

    This set for use with the universal test frame enables the distribution of forces in redundant trusses to be investigated. Due to the range of different fixed length members, numerous plane trusses can be assembled. These are made redundant by the insertion of an additional member of variable length. All members are equipped with full bridge strain gauges. The measuring amplifier is required to display the forces in the members and to further process the measured values on a PC. A set of cables to connect strain gauges and the amplifier is included. The trusses can be loaded using a spindle drive with a ring dynamometer and strain gauge.

Scroll to Top