6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Series / Parallel Pumps

The series and parallel pump test rig is system that has been designed for instructional and experimental use in vocational schools, special colleges and universities. The series and parallel pump test rig can be used, for example, to clarify the differences between serial and parallel operation of two pumps. The test stand includes two identical centrifugal pumps that are driven by speed-controlled DC shunt motors. The speed of the motors is clearly shown on the switch box, together with the current and voltage. The motors are suspended. The driving torque is determined with a torque wrench. The pressure is measured on the intake and delivery side of the pump with manometers. The flow rate in the system is displayed by a water meter. It can also be determined by measuring the differential pressure at a nozzle or orifice.

SKU: 4541cbd0e319 Category:
Request a Quote

Series / Parallel Pumps

Interlabs presents Series / Parallel Pumps, listed under our Fluid Mechanics Turbomachines range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

The series and parallel pump test rig is system that has been designed for instructional and experimental use in vocational schools, special colleges and universities. The series and parallel pump test rig can be used, for example, to clarify the differences between serial and parallel operation of two pumps. The test stand includes two identical centrifugal pumps that are driven by speed-controlled DC shunt motors. The speed of the motors is clearly shown on the switch box, together with the current and voltage. The motors are suspended. The driving torque is determined with a torque wrench. The pressure is measured on the intake and delivery side of the pump with manometers. The flow rate in the system is displayed by a water meter. It can also be determined by measuring the differential pressure at a nozzle or orifice.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Series / Parallel Pumps is listed in the Fluid Mechanics Turbomachines category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics Turbomachines.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Series / Parallel Pumps.

Related products

  • Placeholder
    Fluid Mechanics Turbomachines

    Water Pump Supply Module

    The Basic Module Water Pumps is part of an equipment series that facilitates the investigation of a wide range of engines and machines. Different water pumps can be operated on the basic module and investigated in respect of their characteristic behaviour. The pumps are installed in the experimental set-up using flexible hoses with rapid action couplings. The flow rate is set on a ball-cock and acquired with a magneto-inductive flowmeter. The sensors for intake and delivery pressure are fitted to the pumps to be investigated. All sensors are connected to the measuring unit that is part of the basic module. The measured values recorded are displayed on digital displays on this block. The drive motor for the pump drive is fitted to the Universal Drive and Brake Unit.

  • Placeholder
    Fluid Mechanics Turbomachines

    Oil Pump Supply Module

    The is part of an equipment series that facilitates the investigation of a wide range of engines and machines. Different oil pumps can be operated on the supply module and investigated in terms of their characteristic behaviour. The pumps are connected into the experimental set-up using hydraulic hoses with quick action couplings. The flow is adjusted on a pressure valve and recorded using an oval wheel meter. Other sensors measure the temperature, intake and delivery pressure. The corresponding sensor connections and digital displays are located on the measuring equipment block. All measured data can be transferred to a PC for further processing. The drive motor for operation of the pumps is located on the universal unit.

  • Placeholder
    Fluid Mechanics Turbomachines

    Side Channel Pump

    The test stand is used for investigating the pump characteristic of centrifugal pumps and for process-related measurement exercises. The heart of the system is a small centrifugal pump with a speed-regulated drive. The flow can be measured either with a magneto-inductive flow meter, or using a venturi nozzle and differential pressure transducer. Absolute pressure transducers are provided for measuring the pressures on the intake and delivery sides of the pump. The water temperature is determined using a resistive measuring sensor. The flow rate in the system can be adjusted using ball-cocks. The controls and digital displays are installed in a switch box, this also has a PC interface. Thanks to the data acquisition card and software supplied, the measured data can be displayed, processed and stored on a PC.

  • Placeholder
    Fluid Mechanics Turbomachines

    Series / Parallel Pumps / PC

    The Pump Test Rig was developed for the serial and parallel operation of 2 centrifugal pumps. It is used predominantly for determining pump and system characteristic curves. The measured data is recorded electronically during the experiments. This makes it possible to display and process the data on a PC. At the same time, the measured data is displayed on easy to read digital displays. This allows operation without a PC connected. The test rig basically comprises 2 identical centrifugal pumps that are driven using DC shunt wound motors of adjustable speed. Proximity switches measure the speed of the motors, force transducers on the motor shafts determine the output torque. At all key points on the unit, the pressure is determined using absolute pressure transducers, the flow rate is measured using a magnetic-inductive sensor.

Scroll to Top