Related products

• 
  Fluid Mechanics

  Principles of Hydraulics

  The is part of a series of units that enable experiments to be performed on flow processes with the aid of a computer. Here several areas of incompressible flows can be investigated. After the recording of a pump characteristic curve, experiments on the topics of pipe flow and flow in open flumes can be performed. Water flows through a Venturi tube, an orifice, a bend, or a kink. During this process the pressure loss is measured and compared with the flow through a straight pipe. On flumes experiments can be performed on the open channel and on a channel with weir structures. Two different weir structures are supplied . The Data Logging Unit is necessary for the operation of the Computer Linked Hydraulics Bench. If power data is to be displayed, the Digital Power Meter is required.

• 
  Fluid Mechanics

  Stability Of A Floating Body

  This simple apparatus for determining the metacentre of a model hull is particularly suitable for experiments in small groups. The experiments are performed in a tank filled with water. A transparent hull is used with a rectangular cross-section. Horizontal and vertical sliding weights enable the center of gravity to be adjusted. The position of the sliding weights as well as the draught of the floating body can be read on scales. An inclinometer indicates the angle of heel.

• 
  Fluid Mechanics

  Computer Controlled Aerodynamic Tunnel

  * Adequate size for demostration tests and teaching. * Suitable for three-dimensional models.* Test Chamber builts with transparent materials. * Low operation and maintenance cost. * Suitable for smokes visualization test. * AC motor-ventilator gropu, monophasic, with frequency variator. *The Aerodynbamic Tunnel of 1200*1200 mm section for testing, witha longitude of 2000 mm is of the Eiffeltype, aspirate and of open circuit, and allows us to carry out tests of measuring formces and aerodynamic field on models of structures, construcitons, land vehicles and small planes. * Its power plant, formed by 4 standard type ventilators, of 10 CV of power each one and 900 mm in diameter, has kept the final cost of the product low, while at the same time that assuring a simple and economicmaitenance. Nevertheless, this aspect does not prejudice the quality of the vein, of great uniformity and low turbulence level, thanks also to the adequate design of the contraction, neither does it affect the speed that is reached, this being about 36m/s in a vacuum.

• 
  Fluid Mechanics

  Thermal Engineering Scientific Equipment

  Anodized aluminium structure and panel in painted steel (epoxi paint). Diagram in the front panel. Vacuum-meter of range (-9800 [mm H2O] to 0). Vacuum-meter of range (-1000 [mm H2O] to 0).Manometer of range (0 to 1000 [mm H2O] ). Manometer of range (0 to 2.5 [bars]). Mobile Piston (syringe). 8 valves. Non-return valve. Polyurethane tubes. This system is supplied with atm, bares, psi, mmHg, mm H2O, conversion tables. This system allows the calibration of 6 sensors (same type) simultaneously. Manuals: This unit is supplied with the following manuals: Required Services, Assembly and Installation, Starting-up, Safety, Maintenance & Practices Manuals.Dimensions: 720 x 300 x 570 mm. approx. Weight: 15 Kg. approx.