6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Training System Position Control

This compact teaching / training unit offers every opportunity to learn the fundamentals of process control through experimentation on a linear position control system. The experimentation set-up is mounted on a solid housing which accommodates all the electronics. A transparent protective cover permits safe observation of the experiments. A carriage can be moved by a DC motor via a toothed belt. The linear positioning is measured by a rotary encoder and delivered as a voltage signal. The output signal from the transducer is sent to the software controller. The output signal from the controller influences the motor current. The motor is automatically shut down if the carriage reaches one of the two end positions. The powerful state-of-the-art software is an integral part of the training system, embodying the principle of hardware/software integration (HSI). It enables the experiments to be conducted and evaluated in a user-friendly manner. The software has network capability. The link between the training system and the PC is made via a USB port. Clearly structured and comprehensive instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

SKU: 5e7bd0db5fb2 Category:
Request a Quote

Training System Position Control

Interlabs presents Training System Position Control, listed under our Process Control Eengineering range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

This compact teaching / training unit offers every opportunity to learn the fundamentals of process control through experimentation on a linear position control system. The experimentation set-up is mounted on a solid housing which accommodates all the electronics. A transparent protective cover permits safe observation of the experiments. A carriage can be moved by a DC motor via a toothed belt. The linear positioning is measured by a rotary encoder and delivered as a voltage signal. The output signal from the transducer is sent to the software controller. The output signal from the controller influences the motor current. The motor is automatically shut down if the carriage reaches one of the two end positions. The powerful state-of-the-art software is an integral part of the training system, embodying the principle of hardware/software integration (HSI). It enables the experiments to be conducted and evaluated in a user-friendly manner. The software has network capability. The link between the training system and the PC is made via a USB port. Clearly structured and comprehensive instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Training System Position Control is listed in the Process Control Eengineering category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Process Control Eengineering.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Training System Position Control.

Related products

  • Placeholder
    Process Control Eengineering

    Multi-Process Control Trainer

    This control trainer is a comprehensive unit featuring only industrial components. It contains a transparent tank for liquid-level and pressure control, a corresponding pipe for flow control, and a two-circuit system with a plate heat exchanger for temperature control. Alternatively, a pneumatically operated control valve or a speed-controlled pump are used as actuator. The parameters of the digital controller can be adjusted over wide ranges so that a large number of different process conditions can be investigated. Electronic sensors measure the individual process values. A three-channel recorder with current inputs is included for recording the control behavior over time. Software for the process visualization and Profibus card are available as an accessory.

  • Placeholder
    Process Control Eengineering

    Test Stand for Control Valves

    Control valves are an essential part of process and chemical engineering. The connection between controller and plant is realised with control valves as actuators. Control valves are usually used to regulate flows of gases or liquids. Optimum control loop design depends on a sound knowledge of control valve behaviour as well as a knowledge of the controlled system’s response. This mobile test stand allows to investigate and study control valves of different types. For this purpose the valve is installed in a closed water circuit with a pressure pump and a supply tank. Flow rate and pressure drop across the valve are measured. The trigger signal is generated by potentiometers and indicated on a display. Electrically operated motor valves can be investigated as well as pneumatic control valves. A data acquisition system can be used to record and evaluate characteristics and step responses on a PC.

  • Placeholder
    Process Control Eengineering

    Stirred Tank Test Stand

    This demanding test stand is used to perform experiments on a multivariable system often found in practice. In this particular example, the interacting variables temperature and level are to be controlled in a stirred tank. After the heated product leaves the stirred tank, heat is transferred to the feed by a heat exchanger. A pneumatic control valve controls the tank level via product discharge. The double-walled tank is electrically heated. The system has a closed water circuit. The test stand contains high quality instrumentation. The controllers have a Profibus DP interface which allows the test stand to be monitored with optional process control software . This software can also be used to record the process variables and to tune controller parameters via PC.

  • Placeholder
    Process Control Eengineering

    Process Control Training Plant

    This training system for process control represents a fully functional process control system. It consists of four individual systems: process module, control console, fault simulator and service module. The actual process module contains the devices and loops for liquid-level, flow rate, temperature and pressure control with all necessary equipment, tanks and vessels, pipes and delay coils, various sensors and pneumatically actuated valves. The system is laid out in a way to represent a realistic part of a plant also found in heavy industry. The control console is equipped with four digital universal industrial controllers and four three-channel chart recorders. The controllers can configured independently as required and can be operated both individually and simultaneously. They all have serial interfaces permitting parameters to be set from a PC and facilitating interfacing with a process control system. The separate console for the fault simulation unit is used to study ten different typical system faults, e.g. sensor failure or cable break. These are activated using switches. Their effect on the system behavior of the system can then be investigated. The service module provides compressed air, hot and cold water for the process module. A process communication system facilitates the central control and monitoring of the system.

Scroll to Top