6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Wheel and Differential Axle Apparatus

The model demonstrates the conditions of equilibrium on a differential pulley block. Three anodised aluminium pulleys of different diameter are fitted to a shaft mounted on ball bearings. The forces act, on the one hand, directly on the peripheral of the largest pulley, on the other hand, via a roller on two smaller pulleys. Easy to interchange weights permit the load to be varied such that equilibrium is obtained. The model is intended for wall mounting.

SKU: c68ff628cb44 Category:
Request a Quote

Wheel and Differential Axle Apparatus

Interlabs presents Wheel and Differential Axle Apparatus, listed under our Engineering Mechanics and machi range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

The model demonstrates the conditions of equilibrium on a differential pulley block. Three anodised aluminium pulleys of different diameter are fitted to a shaft mounted on ball bearings. The forces act, on the one hand, directly on the peripheral of the largest pulley, on the other hand, via a roller on two smaller pulleys. Easy to interchange weights permit the load to be varied such that equilibrium is obtained. The model is intended for wall mounting.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Wheel and Differential Axle Apparatus is listed in the Engineering Mechanics and machi category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Engineering Mechanics and machi.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Wheel and Differential Axle Apparatus.

Related products

  • Placeholder
    Engineering Mechanics and machi

    Strain Gauge Training System

    Strain gauges are used extensively in sensor systems to detect forces, moments and deformations. The FL 100 experimentation system provides a comprehensive introduction to the fundamentals of strain gauges. Three test specimens for tension, bending and torsion are each fitted with three strain gauges. The strain gauges are wired into a full bridge configuration. A defined load is generated with the aid of weights, and the elongations can then be recorded. The specimens under test can be inserted quickly and precisely into the mounting frame. The strain gauge application area is protected by a Plexiglas cover, which also makes it clearly visible for inspection purposes. The measuring amplifier unit delivers the bridge supply voltage, and displays the load-dependent output voltage. The digital display is programmable, to provide readouts conforming to the variables being measured. It also features a tare function to exclude the influence of preloads. All detachable test components are clearly laid-out and well-protected inside a storage box.
    The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.

  • Placeholder
    Engineering Mechanics and machi

    Universal Material Tester

    This material tester is a benchtop unit for training purposes. Simple operation and robust construction make the unit suitable for student experiments. The test spectrum for the basis unit covers tensile tests, and also Brinell hardness testing. Using the accessories that are also available, additional bending, shear, cupping and compressive tests can be performed. PC data acquisition and evaluation is also possible. The basic version of the unit does not require any additional sources of power. The test load is generated using a hand operated hydraulic system. The test load is displayed using a large gauge and a trailing pointer. The elongation of the test specimen is recorded via a mechanical gauge. The unit features a clear layout and the rapid changing of accessories.

  • Placeholder
    Engineering Mechanics and machi

    Forces in Various Single Plane Trusses

    This set enables the distribution of the forces in various plane trusses to be investigated using the universal test frame . A useful range of member lengths saves time-consuming adjustment. The members can be quickly and sturdily connected to joint discs using special snap action connectors. For the measurement of the force, all members are equipped with strain gauge bridges. The measuring amplifier is required to display the forces in the members and to further process the measured values on a PC. A set of cables to connect strain gauges and the amplifier is included. The trusses can be loaded using a spindle drive with a ring dynamometer and strain gauge.

  • Placeholder
    Engineering Mechanics and machi

    Mounting Frame

    1. Solid Metal Frame . 2 .Spring Release Edge

Scroll to Top