6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Process Control Training Plant

This training system for process control represents a fully functional process control system. It consists of four individual systems: process module, control console, fault simulator and service module. The actual process module contains the devices and loops for liquid-level, flow rate, temperature and pressure control with all necessary equipment, tanks and vessels, pipes and delay coils, various sensors and pneumatically actuated valves. The system is laid out in a way to represent a realistic part of a plant also found in heavy industry. The control console is equipped with four digital universal industrial controllers and four three-channel chart recorders. The controllers can configured independently as required and can be operated both individually and simultaneously. They all have serial interfaces permitting parameters to be set from a PC and facilitating interfacing with a process control system. The separate console for the fault simulation unit is used to study ten different typical system faults, e.g. sensor failure or cable break. These are activated using switches. Their effect on the system behavior of the system can then be investigated. The service module provides compressed air, hot and cold water for the process module. A process communication system facilitates the central control and monitoring of the system.

SKU: 5c65e52ccd6d Category:
Request a Quote

Process Control Training Plant

Interlabs presents Process Control Training Plant, listed under our Process Control Eengineering range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

This training system for process control represents a fully functional process control system. It consists of four individual systems: process module, control console, fault simulator and service module. The actual process module contains the devices and loops for liquid-level, flow rate, temperature and pressure control with all necessary equipment, tanks and vessels, pipes and delay coils, various sensors and pneumatically actuated valves. The system is laid out in a way to represent a realistic part of a plant also found in heavy industry. The control console is equipped with four digital universal industrial controllers and four three-channel chart recorders. The controllers can configured independently as required and can be operated both individually and simultaneously. They all have serial interfaces permitting parameters to be set from a PC and facilitating interfacing with a process control system. The separate console for the fault simulation unit is used to study ten different typical system faults, e.g. sensor failure or cable break. These are activated using switches. Their effect on the system behavior of the system can then be investigated. The service module provides compressed air, hot and cold water for the process module. A process communication system facilitates the central control and monitoring of the system.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Process Control Training Plant is listed in the Process Control Eengineering category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Process Control Eengineering.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Process Control Training Plant.

Related products

  • Placeholder
    Process Control Eengineering

    Nutsche Vacuum Filter

    Nutsche Filters are used for discontinuous cake filtration of suspensions with high solid concentrations. The suspension production unit produces a suspension of diatomite and water and delivers it from above into the Nutsche Filter. A filter bag is inserted in the Nutsche Filter. A growing filter cake accumulates in the filter bag made from the separated solid material. The vacuum in the bottom section of the Nutsche Filter draws filtrate through the filter cake and the filter bag. It is collected in the bottom section. After filtering, the filter cake obtained is washed with a washing liquid (water) and is dried by the applied vacuum before being removed.

  • Placeholder
    Process Control Eengineering

    Nutsche Pressure Filter

    Nutsche Filters are used for discontinuous cake filtration of suspensions with high solid concentrations. The suspension production unit produces a suspension of diatomite and water and delivers it from above into the Nutsche Filter. In the bottom flange of the Nutsche Filter is a recessed sieve base with a filter cloth. A growing filter cake accumulates on the filter cloth made from the separated solid material. The applied pressure in the top section of the Nutsche Filter pushes the filtrate through the filter cake and the filter cloth. It is collected in the bottom section of the tank. After filtering, the filter cake obtained is washed with a washing liquid (water) and is then dried by an air stream.

  • Placeholder
    Process Control Eengineering

    Pressure Control Demonstration Unit

    This training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of pressure control. All components are clearly laid out on a vertical front panel. The large-format process diagram provides an aid to understanding. The controlled system is operated by compressed air, which must be provided by the laboratory. The use of two in-line pressure vessels permits a 2nd order control system to be constructed. Disturbances can be generated by alternate air tapping by way of a hand-operated valve. Both pressure vessels are fitted with manometers. An electronic pressure transducer measures the pressure. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is an electro-pneumatic control valve. The controlled variable X and the manipulating variable Y can be tapped as analogue signals at lab jacks. This enables external recording equipment, such as a plotter or an oscilloscope, to be connected.
    An instrumentation and control software with interface module (USB) is available as an accessory. This enables the key process variables to be represented, and control functions executed. The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.

  • Placeholder
    Process Control Eengineering

    PH – Value Control Trainer

    This teaching and training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of temperature control. A circulating pump transfers water within a closed circuit. The flow of water can be regulated by a hand-operated valve. The loop also contains a screw-in heater, a heat exchanger with fan, and three integrated thermocouples for temperature measurement. Dead times can be represented by the use of different lengths of process delay. A thyristor power controller is used as the actuator. The controller used is a state-of-the-art digital industrial controller. It can be configured as a continuous or a switching device, and can activate the heater via the actuator and / or the fan. The controlled variable X and the manipulating variable Y are plotted directly on an integrated 2-channel line recorder. Alternatively, the variables can be tapped as analogue signals at lab jacks on the switch cabinet. This enables external recording equipment, such as an oscilloscope or a flatbed plotter, to be connected. A process control software is optionally available. The software permits the construction of a complete networked system comprising multiple trainers from the series. The key process variables can also be represented, and control functions executed.

Scroll to Top