6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Pump and Turbine Trainer

Using the Basic Unit, Pump and Turbine Trainer, an extendable experimental concept for basic experiments in the area of hydraulic fluid-flow machines has been realised. Here the forms the basic unit. Equipped with a powerful centrifugal pump and a sealed water circuit with an own supply tank, the module can be used to perform experiments on pumps. Rotational speed, flow rate and back-pressure can be adjusted. The drive power of the pump is determined using the rotational speed and the torque. Modern electronic measuring instruments and digital displays for pressure, flow rate, torque and rotational speed are integrated into the basic unit. Easy to interchange sets with various types of water turbines enable the range of experiments to be expanded to include experiments on turbines

SKU: d65a6b9e48ec Category:
Request a Quote

Pump and Turbine Trainer

Interlabs presents Pump and Turbine Trainer, listed under our Fluid Mechanics Turbomachines range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

Using the Basic Unit, Pump and Turbine Trainer, an extendable experimental concept for basic experiments in the area of hydraulic fluid-flow machines has been realised. Here the forms the basic unit. Equipped with a powerful centrifugal pump and a sealed water circuit with an own supply tank, the module can be used to perform experiments on pumps. Rotational speed, flow rate and back-pressure can be adjusted. The drive power of the pump is determined using the rotational speed and the torque. Modern electronic measuring instruments and digital displays for pressure, flow rate, torque and rotational speed are integrated into the basic unit. Easy to interchange sets with various types of water turbines enable the range of experiments to be expanded to include experiments on turbines

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Pump and Turbine Trainer is listed in the Fluid Mechanics Turbomachines category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Fluid Mechanics Turbomachines.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Pump and Turbine Trainer.

Related products

  • Placeholder
    Fluid Mechanics Turbomachines

    Two-Stage Axial – Flow Fan

    The was designed for measuring the fan characteristic curve of a two-stage axial fan. For this purpose 2 identical, speed regulated fans are fitted in a pipe. Connections for differential pressure measurement are fitted at appropriate points. Temperature and pressure are measured electronically before and after each stage. A 3-hole sensor with position measurement facilitates the measurement of speed distributions at impellers and guide wheels. In addition, speed and flow rate are measured. For comparison to the fans connected in series, the fans can also be operated separately. The fans each have individually adjustable blades and a guide wheel. All measured data is displayed on the unit and can be processed in other applications by means of the PC data acquisition.

  • Placeholder
    Fluid Mechanics Turbomachines

    Multi-Pump Trainer

    The represents a closed system for training and experiments that is equipped with all the necessary measuring devices. The test rig is equipped with 4 pumps, provision is made for the installation of an additional pump of any type. The pumps fitted comprise 2 identical centrifugal pumps with adjustable speed DC shunt wound motors, a self-priming side channel pump with single phase AC motor, and a reciprocating pump with a single phase AC motor. Manometers on the suction and delivery side of the pumps indicate the relevant pressures in the system. The flow is indicated by a water meter. Volumetric flow rate measurement can be made using the stop watch included. The rotational speed of the drive motors is determined using a handheld tachometer. Current and voltage to the drive motors are indicated in easy to read form on the switch box associated with the test rig. The power regulator for controlling the speed of the DC motors is also to be found there. Torque is determined using a torque wrench with gauge; with the aid of the wrench a counter torque is placed on the shafts of the motors installed as pendulum mechanisms, the torque can then be read off. In this way the provides a wide range of measured data that makes it possible to address key problem areas in pump technology. Due to the closed water circuit and supply from an own
    tank, the test rig is independent of the water mains.

  • Placeholder
    Fluid Mechanics Turbomachines

    Series / Parallel Pumps / PC

    The Pump Test Rig was developed for the serial and parallel operation of 2 centrifugal pumps. It is used predominantly for determining pump and system characteristic curves. The measured data is recorded electronically during the experiments. This makes it possible to display and process the data on a PC. At the same time, the measured data is displayed on easy to read digital displays. This allows operation without a PC connected. The test rig basically comprises 2 identical centrifugal pumps that are driven using DC shunt wound motors of adjustable speed. Proximity switches measure the speed of the motors, force transducers on the motor shafts determine the output torque. At all key points on the unit, the pressure is determined using absolute pressure transducers, the flow rate is measured using a magnetic-inductive sensor.

  • Placeholder
    Fluid Mechanics Turbomachines

    Series / Parallel Pumps

    The series and parallel pump test rig is system that has been designed for instructional and experimental use in vocational schools, special colleges and universities. The series and parallel pump test rig can be used, for example, to clarify the differences between serial and parallel operation of two pumps. The test stand includes two identical centrifugal pumps that are driven by speed-controlled DC shunt motors. The speed of the motors is clearly shown on the switch box, together with the current and voltage. The motors are suspended. The driving torque is determined with a torque wrench. The pressure is measured on the intake and delivery side of the pump with manometers. The flow rate in the system is displayed by a water meter. It can also be determined by measuring the differential pressure at a nozzle or orifice.

Scroll to Top