6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Hydraulic Universal Material Tester

Due to the clear, straightforward layout of this materials tester, tests can be observed in detail during all phases; this is rarely possible on industrial testers. Nevertheless, the capacity of the tester is sufficient to carry out tests of an industrial nature. Simple operation and robust construction make the tester particularly suitable for student experiments. The tester is a vertical, hydraulically operated pillar tester with direct generation of both tensile and compressive forces. The height of the lower cross-member can be adjusted in steps for coarse adjustment. Cylindrical receptacles on the cross-members make the different experimental set-ups easy to change, e.g. wedge clamps. Force and displacement are measured electronically, and displayed digitally. For experiments specimen according DIN 50125 can be used.

SKU: c2c2a0cf829e Category:
Request a Quote

Hydraulic Universal Material Tester

Interlabs presents Hydraulic Universal Material Tester, listed under our Engineering Mechanics and machi range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

Due to the clear, straightforward layout of this materials tester, tests can be observed in detail during all phases; this is rarely possible on industrial testers. Nevertheless, the capacity of the tester is sufficient to carry out tests of an industrial nature. Simple operation and robust construction make the tester particularly suitable for student experiments. The tester is a vertical, hydraulically operated pillar tester with direct generation of both tensile and compressive forces. The height of the lower cross-member can be adjusted in steps for coarse adjustment. Cylindrical receptacles on the cross-members make the different experimental set-ups easy to change, e.g. wedge clamps. Force and displacement are measured electronically, and displayed digitally. For experiments specimen according DIN 50125 can be used.

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Hydraulic Universal Material Tester is listed in the Engineering Mechanics and machi category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Engineering Mechanics and machi.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Hydraulic Universal Material Tester.

Related products

  • Placeholder
    Engineering Mechanics and machi

    Experimental Set Portal Frame

    The set is intended for use with the universal test frame and demonstrates the elastic deformation of loaded frames. The test specimens are a U-shaped and and S-shaped frame made of steel with a square cross-section. These are subjected to varying loads using sets of weights and the resulting deformation measured. For this purpose, the set includes two precision position measurement gauges. The bearings can be either fixed or free enabling the frames to be evaluated as statically defined or undefined systems. The experimental set-up is quickly and securely assembled using special clamps.

  • Placeholder
    Engineering Mechanics and machi

    Shearing Force Apparatus

    This demonstration unit facilitates the experimental investigation of the progression of the shearing force in a bar subject to point loads. Also the section principle commonly used in mechanics can be demonstrated. Due to the usage at 1/3 span of a low friction joint sensitive to shearing forces and a dynamometer, the measurements of shearing force on the bar can be recorded directly. The deflection of the bar as a result of the travel of the dynamometers and the horizontal alignment can be compensated and regulated using two adjustment bolts. The bar is loaded with graduated sets of weights that can be attached at any point on the bar. The support rollers are equipped with ball bearings

  • Placeholder
    Engineering Mechanics and machi

    Forces in Various Single Plane Trusses

    This set enables the distribution of the forces in various plane trusses to be investigated using the universal test frame . A useful range of member lengths saves time-consuming adjustment. The members can be quickly and sturdily connected to joint discs using special snap action connectors. For the measurement of the force, all members are equipped with strain gauge bridges. The measuring amplifier is required to display the forces in the members and to further process the measured values on a PC. A set of cables to connect strain gauges and the amplifier is included. The trusses can be loaded using a spindle drive with a ring dynamometer and strain gauge.

  • Placeholder
    Engineering Mechanics and machi

    Experimental Set Deflection Of Trusses

    This experimental set enables, in conjunction with the universal test frame , the elastic deformation of different plane trusses to be experimentally investigated. During these experiments, Castigliano’s theory is demonstrated and applied. The truss members are made of PVC. The different lengths of the members enable numerous truss variants to be assembled and save time-consuming adjustment. The members are quickly and securely attached to the joint disc using special snap action joints. A spindle drive with a ring dynamometer is used to load the truss. The two bearings with joint discs and the loading device are equipped with rapid action fasteners for attachment to the frame.

Scroll to Top