6262/9, 6262/26, Idgah Road, Ambala Cantt 133001. India.

Awaiting product image

Shearing Force Apparatus

This demonstration unit facilitates the experimental investigation of the progression of the shearing force in a bar subject to point loads. Also the section principle commonly used in mechanics can be demonstrated. Due to the usage at 1/3 span of a low friction joint sensitive to shearing forces and a dynamometer, the measurements of shearing force on the bar can be recorded directly. The deflection of the bar as a result of the travel of the dynamometers and the horizontal alignment can be compensated and regulated using two adjustment bolts. The bar is loaded with graduated sets of weights that can be attached at any point on the bar. The support rollers are equipped with ball bearings

SKU: e18306f48dae Category:
Request a Quote

Shearing Force Apparatus

Interlabs presents Shearing Force Apparatus, listed under our Engineering Mechanics and machi range. This product page brings together the available product information to help laboratories, educational institutions, engineering departments and procurement teams assess its relevance.

Product Overview

This demonstration unit facilitates the experimental investigation of the progression of the shearing force in a bar subject to point loads. Also the section principle commonly used in mechanics can be demonstrated. Due to the usage at 1/3 span of a low friction joint sensitive to shearing forces and a dynamometer, the measurements of shearing force on the bar can be recorded directly. The deflection of the bar as a result of the travel of the dynamometers and the horizontal alignment can be compensated and regulated using two adjustment bolts. The bar is loaded with graduated sets of weights that can be attached at any point on the bar. The support rollers are equipped with ball bearings

Key Information and Features

The details below are based on the supplied product description. Please confirm the final configuration, included accessories, materials, dimensions and operating requirements with Interlabs before placing an order.

Applications and Use

Shearing Force Apparatus is listed in the Engineering Mechanics and machi category. Its intended use should be assessed against the experiments, demonstrations, training activities or operational requirements described in the product information. Contact Interlabs if you need help matching the product to a particular application.

Selection and Enquiry Guidance

When evaluating this product, share your application, required configuration, quantity and any institutional or project requirements. Interlabs can help clarify available options and confirm the product details relevant to your enquiry.

Frequently Asked Questions

What category does this product belong to?

This product is listed under Engineering Mechanics and machi.

Where can I get confirmed specifications?

Contact Interlabs with the product name and your requirements to confirm current specifications, configuration and included components.

Can I request product or bulk enquiry support?

Yes. Share the required quantity, application and delivery location with Interlabs for enquiry assistance.

Contact Interlabs

For product details, technical clarification, configuration questions or a quotation, contact Interlabs and mention Shearing Force Apparatus.

Related products

  • Placeholder
    Engineering Mechanics and machi

    Experimental Set Portal Frame

    The set is intended for use with the universal test frame and demonstrates the elastic deformation of loaded frames. The test specimens are a U-shaped and and S-shaped frame made of steel with a square cross-section. These are subjected to varying loads using sets of weights and the resulting deformation measured. For this purpose, the set includes two precision position measurement gauges. The bearings can be either fixed or free enabling the frames to be evaluated as statically defined or undefined systems. The experimental set-up is quickly and securely assembled using special clamps.

  • Placeholder
    Engineering Mechanics and machi

    Transmitted Light Polariscope

    Using this transmitted light polariscope, photoelastic experiments can be performed. This process exploits the fact that the refractive index of photoelastically sensitive materials changes under mechanical stress. Transmitted polarised light experiences a rotation of its plane of polarisation, this results in lines in the material subject to the same stress being of the same colour. The distribution of the stress in the model can thus be clearly seen. The polariscope can either generate coloured stress diagrams using white light or, using monochromatic light, light-dark diagrams. The filters, which have angular scales, can be rotated in a holder mounted on rollers. On the side is a pointer using which the angular position can be read off. Light sources, polarisation filters and load frames are separate components on this unit. Thus it is possible to realise flexible experimental set-ups also with own models.

  • Placeholder
    Engineering Mechanics and machi

    Wheel and Differential Axle Apparatus

    The model demonstrates the conditions of equilibrium on a differential pulley block. Three anodised aluminium pulleys of different diameter are fitted to a shaft mounted on ball bearings. The forces act, on the one hand, directly on the peripheral of the largest pulley, on the other hand, via a roller on two smaller pulleys. Easy to interchange weights permit the load to be varied such that equilibrium is obtained. The model is intended for wall mounting.

  • Placeholder
    Engineering Mechanics and machi

    Universal Material Tester

    This material tester is a benchtop unit for training purposes. Simple operation and robust construction make the unit suitable for student experiments. The test spectrum for the basis unit covers tensile tests, and also Brinell hardness testing. Using the accessories that are also available, additional bending, shear, cupping and compressive tests can be performed. PC data acquisition and evaluation is also possible. The basic version of the unit does not require any additional sources of power. The test load is generated using a hand operated hydraulic system. The test load is displayed using a large gauge and a trailing pointer. The elongation of the test specimen is recorded via a mechanical gauge. The unit features a clear layout and the rapid changing of accessories.

Scroll to Top