Overview of Hydrocyclone

Hydrocyclone is included in the Interlabs Process Control Eengineering range. The product’s intended role, construction and suitability should be assessed using the manufacturer’s or supplier’s confirmed product information and the requirements of the task for which it is being considered.

Hydrocyclones can be used to separate solids suspended in liquids. In the suspension is prepared in a tank. A stirrer prevents premature settling of the solid particles. An eccentric screw pump delivers the suspension into the tangential inlet of the cyclone. In the cyclone a downward primary vortex is created. The downward taper causes the vortex to reverse. In the middle it moves as a secondary vortex back up towards the immersion tube, where the suspension emerges from the cyclone, having lost the coarse material in it. Inside the cyclone an air core is formed. The centrifugal forces cause the coarser solid particles in the primary vortex to be enriched. They are discharged with the bottom flow at the apex nozzle. It is mainly the fine material that is discharged from the top. The outflow form of the bottom flow changes depending on the solid concentration of the introduced suspension. Where the solid concentration is high, strand discharge occurs. Where the solid concentration is low, the discharge is fan-shaped. The flow rate in the inlet is adjusted by way of the pump speed and measured with a magneto-inductive flow meter. Sampling points are installed at the bottom and top flow points. The flow rates in them can be determined by means of a measuring cup and a stopwatch. To determine the solid concentration, a balance and a drying chamber are recommended. Using a suitable analysis device (such as a diffraction spectrometer), a separation function can be produced and the separation size determined. Quartz powder is recommended for use as the solid.

Key features and product details

Hydrocyclones can be used to separate solids suspended in liquids. In the suspension is prepared in a tank. A stirrer prevents premature settling of the solid particles. An eccentric screw pump delivers the suspension into the tangential inlet of the cyclone. In the cyclone a downward primary vortex is created. The downward taper causes the vortex to reverse. In the middle it moves as a secondary vortex back up towards the immersion tube, where the suspension emerges from the cyclone, having lost the coarse material in it. Inside the cyclone an air core is formed. The centrifugal forces cause the coarser solid particles in the primary vortex to be enriched. They are discharged with the bottom flow at the apex nozzle. It is mainly the fine material that is discharged from the top. The outflow form of the bottom flow changes depending on the solid concentration of the introduced suspension. Where the solid concentration is high, strand discharge occurs. Where the solid concentration is low, the discharge is fan-shaped. The flow rate in the inlet is adjusted by way of the pump speed and measured with a magneto-inductive flow meter. Sampling points are installed at the bottom and top flow points. The flow rates in them can be determined by means of a measuring cup and a stopwatch. To determine the solid concentration, a balance and a drying chamber are recommended. Using a suitable analysis device (such as a diffraction spectrometer), a separation function can be produced and the separation size determined. Quartz powder is recommended for use as the solid.

Applications and use considerations

The correct application for Hydrocyclone depends on the features and specifications confirmed for the supplied model. Before using or purchasing the product, consider the task to be performed, the materials or samples involved, the working environment and any procedure or institutional requirements that apply.

• Match the product’s stated purpose and features to the intended task.
• Check compatibility with the materials, samples or operating conditions involved.
• Review any required accessories, consumables, installation or training.
• Confirm whether manuals, calibration records, test reports or certificates are needed.

How to evaluate and select Process Control Eengineering equipment

1. Define the requirement: Identify the procedure, application and expected workload.
2. Compare stated features: Use the product details above and compare them with the requirements of the task.
3. Verify technical specifications: Confirm relevant values such as capacity, range, accuracy, dimensions, material, power requirements or operating limits, where applicable.
4. Check compatibility: Ensure the product is suitable for the samples, materials and environment in which it will be used.
5. Review documentation and support: Ask about manuals, certificates, maintenance, spare parts and after-sales support where required.

Technical information to confirm

Not every technical detail is necessarily included in the catalogue description. Before ordering Hydrocyclone, confirm any application-critical information that is not stated, such as model or configuration, dimensions, operating range, accuracy or tolerance, material grade, power supply, included accessories, applicable standards, certificates and warranty or service arrangements. Do not assume a specification that is not listed.

Frequently asked questions

What is Hydrocyclone?

Hydrocyclone is a product listed in the Process Control Eengineering category. The available product description and features are provided in the overview above.

What information is available about this product?

The page includes the product details supplied in the Interlabs catalogue. Contact Interlabs to verify any additional specifications or documents required for your application.

How do I know whether Hydrocyclone is suitable for my requirement?

Compare the confirmed product features and technical specifications with your intended task, materials and operating conditions. Request technical clarification if any important detail is missing.

How can I request a quotation?

Contact Interlabs with the product name, required quantity and application details to enquire about availability and a quotation.

Enquire about Hydrocyclone

For further product information, technical clarification, availability or a quotation for Hydrocyclone, contact the Interlabs team.

Contact Interlabs