Overview of Solid-Liquid Extraction

Solid-Liquid Extraction is included in the Interlabs Process Control Eengineering range. The product’s intended role, construction and suitability should be assessed using the manufacturer’s or supplier’s confirmed product information and the requirements of the task for which it is being considered.

The Solid-Liquid Extraction allows a soluble component of a solid mixture to be extracted. In continuous three-stage mode, pure solvent (water) is delivered from a tank to the nozzle of the first extraction stage where it is distributed over the extraction material. The solvent seeps through the extraction material, takes up the soluble components and passes into the collecting segment. From here, the enriched solvent is delivered to the nozzle of the next stage. After passing through the last stage, the solvent charged with the extracted component is collected in the extract tank. The extraction material (potassium bicarbonate with special carrier material) is continuously fed into the cells of the rotating extractor by a feed mechanism. The extraction material and solvent move in countercurrent and the depleted extraction residue falls into a tank after one rotation of the extractor.Valves can be used to switch to 1 or 2-stage continuous mode. Discontinuous mode is possible with the carousel stopped. Three pumps are available for delivering the solvent, their speed can be individually adjusted for each stage . The solvent temperature at each level is adjusted by a PID controller and displayed. Each stage is equipped with conductivity sensors to monitor. the separation process. Relevant experimental parameters are recorded by sensors, displayed digitally and can be processed onto a PC.

Key features and product details

The Solid-Liquid Extraction allows a soluble component of a solid mixture to be extracted. In continuous three-stage mode, pure solvent (water) is delivered from a tank to the nozzle of the first extraction stage where it is distributed over the extraction material. The solvent seeps through the extraction material, takes up the soluble components and passes into the collecting segment. From here, the enriched solvent is delivered to the nozzle of the next stage. After passing through the last stage, the solvent charged with the extracted component is collected in the extract tank. The extraction material (potassium bicarbonate with special carrier material) is continuously fed into the cells of the rotating extractor by a feed mechanism. The extraction material and solvent move in countercurrent and the depleted extraction residue falls into a tank after one rotation of the extractor.Valves can be used to switch to 1 or 2-stage continuous mode. Discontinuous mode is possible with the carousel stopped. Three pumps are available for delivering the solvent, their speed can be individually adjusted for each stage . The solvent temperature at each level is adjusted by a PID controller and displayed. Each stage is equipped with conductivity sensors to monitor. the separation process. Relevant experimental parameters are recorded by sensors, displayed digitally and can be processed onto a PC.

Applications and use considerations

The correct application for Solid-Liquid Extraction depends on the features and specifications confirmed for the supplied model. Before using or purchasing the product, consider the task to be performed, the materials or samples involved, the working environment and any procedure or institutional requirements that apply.

• Match the product’s stated purpose and features to the intended task.
• Check compatibility with the materials, samples or operating conditions involved.
• Review any required accessories, consumables, installation or training.
• Confirm whether manuals, calibration records, test reports or certificates are needed.

How to evaluate and select Process Control Eengineering equipment

1. Define the requirement: Identify the procedure, application and expected workload.
2. Compare stated features: Use the product details above and compare them with the requirements of the task.
3. Verify technical specifications: Confirm relevant values such as capacity, range, accuracy, dimensions, material, power requirements or operating limits, where applicable.
4. Check compatibility: Ensure the product is suitable for the samples, materials and environment in which it will be used.
5. Review documentation and support: Ask about manuals, certificates, maintenance, spare parts and after-sales support where required.

Technical information to confirm

Not every technical detail is necessarily included in the catalogue description. Before ordering Solid-Liquid Extraction, confirm any application-critical information that is not stated, such as model or configuration, dimensions, operating range, accuracy or tolerance, material grade, power supply, included accessories, applicable standards, certificates and warranty or service arrangements. Do not assume a specification that is not listed.

Frequently asked questions

What is Solid-Liquid Extraction?

Solid-Liquid Extraction is a product listed in the Process Control Eengineering category. The available product description and features are provided in the overview above.

What information is available about this product?

The page includes the product details supplied in the Interlabs catalogue. Contact Interlabs to verify any additional specifications or documents required for your application.

How do I know whether Solid-Liquid Extraction is suitable for my requirement?

Compare the confirmed product features and technical specifications with your intended task, materials and operating conditions. Request technical clarification if any important detail is missing.

How can I request a quotation?

Contact Interlabs with the product name, required quantity and application details to enquire about availability and a quotation.

Enquire about Solid-Liquid Extraction

For further product information, technical clarification, availability or a quotation for Solid-Liquid Extraction, contact the Interlabs team.

Contact Interlabs