Overview of Level Control Trainer

Level Control Trainer is included in the Interlabs Process Control Eengineering range. The product’s intended role, construction and suitability should be assessed using the manufacturer’s or supplier’s confirmed product information and the requirements of the task for which it is being considered.

This teaching and training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of level control. A pump transfers water from a storage tank to the transparent process tank. The liquid level is measured by an electronic pressure transducer installed at the base of the process tank. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is a pneumatically operated control valve with an electro-pneumatic positioner. A ball valve in the outlet line enables defined disturbance variables to be generated. The controlled variable X and the manipulating variable Y are plotted directly on an integrated 2-channel line recorder. Alternatively, the variables can be tapped as analogue signals at lab jacks on the switch cabinet. This enables external recording equipment, such as an oscilloscope or a flatbed plotter, to be connected. A process control software is optionally available. The software permits the construction of a complete networked system comprising multiple trainers from the series. The key process variables can also be represented, and control functions executed. The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.

Key features and product details

This teaching and training system provides a comprehensive experimental introduction to the fundamentals of process control using an example of level control. A pump transfers water from a storage tank to the transparent process tank. The liquid level is measured by an electronic pressure transducer installed at the base of the process tank. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is a pneumatically operated control valve with an electro-pneumatic positioner. A ball valve in the outlet line enables defined disturbance variables to be generated. The controlled variable X and the manipulating variable Y are plotted directly on an integrated 2-channel line recorder. Alternatively, the variables can be tapped as analogue signals at lab jacks on the switch cabinet. This enables external recording equipment, such as an oscilloscope or a flatbed plotter, to be connected. A process control software is optionally available. The software permits the construction of a complete networked system comprising multiple trainers from the series. The key process variables can also be represented, and control functions executed. The well-structured instructional material outlines the technological fundamentals and provides a step-by-step guide through the experiments.

Applications and use considerations

The correct application for Level Control Trainer depends on the features and specifications confirmed for the supplied model. Before using or purchasing the product, consider the task to be performed, the materials or samples involved, the working environment and any procedure or institutional requirements that apply.

• Match the product’s stated purpose and features to the intended task.
• Check compatibility with the materials, samples or operating conditions involved.
• Review any required accessories, consumables, installation or training.
• Confirm whether manuals, calibration records, test reports or certificates are needed.

How to evaluate and select Process Control Eengineering equipment

1. Define the requirement: Identify the procedure, application and expected workload.
2. Compare stated features: Use the product details above and compare them with the requirements of the task.
3. Verify technical specifications: Confirm relevant values such as capacity, range, accuracy, dimensions, material, power requirements or operating limits, where applicable.
4. Check compatibility: Ensure the product is suitable for the samples, materials and environment in which it will be used.
5. Review documentation and support: Ask about manuals, certificates, maintenance, spare parts and after-sales support where required.

Technical information to confirm

Not every technical detail is necessarily included in the catalogue description. Before ordering Level Control Trainer, confirm any application-critical information that is not stated, such as model or configuration, dimensions, operating range, accuracy or tolerance, material grade, power supply, included accessories, applicable standards, certificates and warranty or service arrangements. Do not assume a specification that is not listed.

Frequently asked questions

What is Level Control Trainer?

Level Control Trainer is a product listed in the Process Control Eengineering category. The available product description and features are provided in the overview above.

What information is available about this product?

The page includes the product details supplied in the Interlabs catalogue. Contact Interlabs to verify any additional specifications or documents required for your application.

How do I know whether Level Control Trainer is suitable for my requirement?

Compare the confirmed product features and technical specifications with your intended task, materials and operating conditions. Request technical clarification if any important detail is missing.

How can I request a quotation?

Contact Interlabs with the product name, required quantity and application details to enquire about availability and a quotation.

Enquire about Level Control Trainer

For further product information, technical clarification, availability or a quotation for Level Control Trainer, contact the Interlabs team.

Contact Interlabs